首页 | 本学科首页   官方微博 | 高级检索  
     检索      

硼钢板相比例控制试验方法及试验参数的确定
引用本文:林建平,唐会君,郭夏阳,李芳芳.硼钢板相比例控制试验方法及试验参数的确定[J].同济大学学报(自然科学版),2016,44(12):1889-1893.
作者姓名:林建平  唐会君  郭夏阳  李芳芳
作者单位:同济大学 上海市地面交通工具空气动力与热环境模拟重点实验室, 上海 201804;同济大学 机械与能源工程学院, 上海 201804,同济大学 机械与能源工程学院, 上海 201804,同济大学 机械与能源工程学院, 上海 201804,同济大学 机械与能源工程学院, 上海 201804
基金项目:国家自然科学基金资助项目(51375346);高等学校博士学科点专项科研基金资助项目(20110072110056).
摘    要:车身用硼钢板的机械性能实际取决于微观组织的相比例,而不同的相比例是由保温温度、保温时间等试验参数决定的,若要获得材料预期的相比例,需研究试验参数与相比例的关系.利用高温相变仪在降温速率30℃·s-1的工况下研究了不同保温温度下材料的相比例,并结合经验公式给出了硼钢板相比例控制的关键参数及相比例控制方法,可为工程实际中获取固定相比例的微观组织提供理论参考.

关 键 词:硼钢板  相比例  试验参数
收稿时间:2016/2/18 0:00:00
修稿时间:2016/10/31 0:00:00

The Determination of the Experimental Method and the Key Parameters Based on the Phase Ratio Control of Boron Steel
LIN Jianping,TANG Huijun,GUO Xiayang and LI Fangfang.The Determination of the Experimental Method and the Key Parameters Based on the Phase Ratio Control of Boron Steel[J].Journal of Tongji University(Natural Science),2016,44(12):1889-1893.
Authors:LIN Jianping  TANG Huijun  GUO Xiayang and LI Fangfang
Institution:The Determination of the Experimental Method and the Key Parameters Based on the Phase Ratio Control of Boron Steel,The Determination of the Experimental Method and the Key Parameters Based on the Phase Ratio Control of Boron Steel,The Determination of the Experimental Method and the Key Parameters Based on the Phase Ratio Control of Boron Steel and The Determination of the Experimental Method and the Key Parameters Based on the Phase Ratio Control of Boron Steel
Abstract:
Keywords:boron steel  phase ratio  experimental parameters
本文献已被 CNKI 等数据库收录!
点击此处可从《同济大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《同济大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号