首页 | 本学科首页   官方微博 | 高级检索  
     检索      

钢筋混凝土框架柱的三维有限元模拟分析
引用本文:张国军,刘伯权,白国良.钢筋混凝土框架柱的三维有限元模拟分析[J].同济大学学报(自然科学版),2005,33(8):995-1000.
作者姓名:张国军  刘伯权  白国良
作者单位:1. 同济大学,土木工程防灾国家重点室验室,上海,200092
2. 长安大学,建筑工程学院,陕西,西安,710061
3. 西安建筑科技大学,土木工程学院,陕西,西安,710055
基金项目:国家自然科学基金资助项目(50025821,50321803)
摘    要:通过ANSYS软件模拟了单调荷载作用下钢筋混凝土试验框架柱的荷载—位移曲线,并与相应的试验结果进行比较分析.在有限元模拟试验框架柱的基础上,用ANSYS软件模拟了未做过试验的不同轴压比下的框架柱荷载—位移曲线.最后,根据ANSYS模拟的普通混凝土和高强混凝土框架柱的单调荷载—位移曲线,分析和讨论了箍筋形式、混凝土强度及截面形式等因素对轴压比限值的影响,从而确定出各种情况下的轴压比限值.

关 键 词:框架柱  ANSYS软件  有限元  轴压比限值  骨架曲线
文章编号:0253-374X(2005)08-0995-06
收稿时间:05 18 2004 12:00AM
修稿时间:2004-05-18

Three-Dimensional Finite Element Simulative Analysis of Reinforced Concrete Frame Columns
ZHANG Guo-jun,LIU Bo-quan,BAI Guo-liang.Three-Dimensional Finite Element Simulative Analysis of Reinforced Concrete Frame Columns[J].Journal of Tongji University(Natural Science),2005,33(8):995-1000.
Authors:ZHANG Guo-jun  LIU Bo-quan  BAI Guo-liang
Abstract:Load-displacement curves of reinforced concrete frame columns under laterally monotonic load were simulaed by ANSYS software in this paper,and the analysis results were compared with the experimental results.Based on the finite element model,the load-displacement curves of reinforced concrete frame columns with different axial compression ratios were obtained through the simulative analysis with ANSYS software.Lastly,the factors such as types of stirrups,strength of concrete,and sectional forms,etc.influencing the limit value of axial compressive ratio were analyzed and discussed,and then limit values of axial compressive ratio of frame columns in all conditions were obtained.
Keywords:frame column  ANSYS software  finite element  limit value of axial compressive ratio  skeleton curve
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号