| 无系杆摆线针轮啮合副齿廓修形的设计 |
| |
| 引用本文： | 焦文瑞,孔庆华,宋德朝,刘金龙.无系杆摆线针轮啮合副齿廓修形的设计[J].同济大学学报(自然科学版),2010,38(1). |
| |
| 作者姓名： | 焦文瑞 孔庆华 宋德朝 刘金龙 |
| |
| 作者单位： | 1. 同济大学,机械工程学院,上海,201804
2. 镇江液压件厂有限责任公司技术中心,江苏,镇江,212005 |
| |
| 基金项目： | 江苏省科技成果转化基金 |
| |
| 摘 要： | 为解决全液压转向器转子转动不灵活的问题,在分析现有摆线针轮啮合副齿廓修形理论基础上,建立摆线副修形的相对性概念和间隙分布评价指标,提出无系杆摆线副修形的主要目标应使初始间隙分布均匀,选择的修形方式为等距修形.以BZZ全液压转向器中的摆线副基本齿形参数进行实例计算,与等距加移距修形的初始间隙进行对比,并通过试验证明.结果表明,在无系杆摆线副中,等距修形方式的初始间隙小,间隙分布均匀,转子转动灵活,并提高了全液压转向器的密封性.
|
| 关 键 词： | 摆线副 齿廓修形 初始间隙 间隙均匀 |
Design of Teeth Profile Modification on No Tie Bar Xycloidal Pair |
| |
| JIAO Wenrui,KONG Qinghu,SONG Dechao and LIU Jinlong.Design of Teeth Profile Modification on No Tie Bar Xycloidal Pair[J].Journal of Tongji University(Natural Science),2010,38(1). |
| |
| Authors: | JIAO Wenrui KONG Qinghu SONG Dechao and LIU Jinlong |
| |
| Institution: | JIAO Wenrui1,KONG Qinghua1,SONG Dechao1,LIU Jinlong2(1.College of Mechanical Engineering,Tongji University,Shanghai 201804,China,2.Zhenjiang Hydraulic Components Manufacturing Co.Ltd.,Zhenjiang 212005,China) |
| |
| Abstract: | On the basis of the modification theory,relative modification concept of cycloidal gear pair and the appraisal index of the initial backlash are built to solve the problem that cycloidal gear works unsmoothly in pin wheel of the full-hydrostatic steering control units.The major goal of modification is a uniformity of initial backlash,so equidistance modification that has good effect on improving quality of fluid cycloidal pair is chosen.As an example of rp=34 mmrrp=11.1 mm a=3.8 mm,the BZZ full-hydrostatic ... |
| |
| Keywords: | cycloid pair teeth profile modification initial backlash backlash uniformity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《同济大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《同济大学学报(自然科学版)》下载免费的PDF全文 |
|
