首页 | 本学科首页   官方微博 | 高级检索  
     检索      

方钢管混凝土柱外置式环梁节点的联结面抗剪研究
引用本文:李学平,吕西林.方钢管混凝土柱外置式环梁节点的联结面抗剪研究[J].同济大学学报(自然科学版),2002,30(1):11-17.
作者姓名:李学平  吕西林
作者单位:同济大学,结构工程与防灾研究所,上海,200092
基金项目:上海市科技发展基金资助项目 ( 0 2 70 -2 370 10 )
摘    要:根据方钢管混凝土柱外置式环梁节点的受力特点,设计了联结面试件,进行了八个联结面试件的抗剪试验,变化参数为混凝土强度,加载剪跨比,肋钢筋的布置方式及肋钢筋的直径,分析了试验现象及试件中钢筋应变发展规律。试验结果表明,这种联结面传力方式可用于工程实践,并提出了面向工程的联结而设计方法。

关 键 词:方钢管混凝土柱  环梁节点  联结面  抗剪试验  混凝土强度  加载剪跨比  布置方式
文章编号:0253-374(2002)11-0011-07
修稿时间:2001年4月11日

Shear-resistant Capacity of Interface of Ring-beam Connection Located outside Concrete-filled Rectangular Tubular Column
LI Xue-ping,LU Xi-lin.Shear-resistant Capacity of Interface of Ring-beam Connection Located outside Concrete-filled Rectangular Tubular Column[J].Journal of Tongji University(Natural Science),2002,30(1):11-17.
Authors:LI Xue-ping  LU Xi-lin
Abstract:According to the characteristics of the ring-beam connection located outside concrete-filled rectangular steel tubular(CFRT) columns,the interface specimens were designed and the shear-resistant tests on eight specimens were carried out.The main parameters varied for the tests are the concrete grade,the shear-span ratio,the location and the diameter of the rib-bar welded on the columns.The shear behavior of the specimens and the influence of different reinforcement of the connections were investigated.The strain on the reinforcing bars in the specimens was also analyzed.The test and analysis have showed that the shear-resistant capacity of this new type of connection is good enough when used in practical engineering.
Keywords:concrete-filled rectangular steel tubular columns  ring-beam connections  interface  shear-resistant test
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号