首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于圆环孔合成射流器的LED前照灯散热控制
引用本文:朱晖,杨志刚,王国俊.基于圆环孔合成射流器的LED前照灯散热控制[J].同济大学学报(自然科学版),2020,48(2):257-263.
作者姓名:朱晖  杨志刚  王国俊
作者单位:同济大学 上海地面交通工具风洞中心,上海 201804;上海市地面交通工具空气动力与热环境模拟重点实验室,上海 201804,同济大学 上海地面交通工具风洞中心,上海 201804;上海市地面交通工具空气动力与热环境模拟重点实验室,上海 201804;北京民用飞机技术研究中心,北京 102211,华为技术有限公司南京研究所, 江苏 南京 210012
基金项目:上海市地面交通工具风洞专业技术服务平台(19DZ2290400)
摘    要:采用实验方法明确圆环孔合成射流器的速度分布特征,利用参数化方法获得最佳散热距离,将其与发光二极管(LED)前照灯组合后采用实验方法明确合成射流器对LED前照灯的散热效果。基于大涡模拟对该部件的流场及温度场进行解算,在验证仿真方法有效性的同时明确温度及换热系数的分布规律。采用正交分解法对该部件流场及铝基板表面对流换热系数进行分析,表明壁面对流换热系数的分布特征及合成射流器的散热控制效果主要由流场中的大尺度涡结构所决定。

关 键 词:散热控制  合成射流  前照灯  正交分解
收稿时间:2019/4/24 0:00:00
修稿时间:2019/9/3 0:00:00

Thermal Control of LED Headlamp Based on Annular Synthetic Jet
Abstract:The velocity distribution profiles of annular synthetic jet were identified by experimental method and the optimum heat dissipation distance was obtained by parametric study. By combining it with LED headlamp, the heat dissipation effect of the synthetic jet on LED headlamp was confirmed by the experimental method. Based on large eddy simulation, the flow field and temperature field of the component were solved, and the distribution of temperature and heat transfer coefficient was clarified while verifying the validity of the simulation method. POD method was used to analyze the flow field and convective heat transfer coefficient on the surface of aluminum substrate. The results indicated that the distribution characteristics of convective heat transfer coefficient and thermal control effect of synthetic jet are mainly determined by the large-scale eddy of the flow field.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《同济大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《同济大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号