首页 | 本学科首页   官方微博 | 高级检索  
     检索      

飞行冲突解脱的几何优化模型
引用本文:吴明功,王泽坤,温祥西,蒋旭瑞,孙千锐.飞行冲突解脱的几何优化模型[J].系统工程与电子技术,2019,41(4):863-869.
作者姓名:吴明功  王泽坤  温祥西  蒋旭瑞  孙千锐
作者单位:1. 空军工程大学空管领航学院, 陕西 西安 710051; 2. 国家空管防相撞技术重点实验室, 陕西 西安 710051; 3. 中国人民解放军94347部队, 辽宁 沈阳 110043
摘    要:针对空中交通管制中的冲突探测与解脱问题,提出了一种几何最优的冲突探测与解脱方法。首先定义了该问题的冲突解脱点,在该点处预判飞机之间可能存在的飞行冲突。其次,采取同向同角度的方式解决飞行冲突,即在原航迹上两机同时向同一侧改变相同角度,得到新的航迹交叉点,即航迹恢复点,使得两机之间始终保持最小安全距离。通过几何分析,理论推导了两机航迹距离之和与各自改变航向角度之间的关系,该模型能够有效地解决飞行和冲突,并且具体给出冲突解脱和航迹恢复的位置,以及所涉及到的参数求解过程。最后通过仿真分析,结果显示该方法简单高效。


Aircraft conflict resolution model based on geometric optimization
WU Minggong,WANG Zekun,WEN Xiangxi,JIANG Xurui,SUN Qianrui.Aircraft conflict resolution model based on geometric optimization[J].System Engineering and Electronics,2019,41(4):863-869.
Authors:WU Minggong  WANG Zekun  WEN Xiangxi  JIANG Xurui  SUN Qianrui
Institution:1. Air Traffic Control and Navigation College, Air Force Engineering University, Xi’an 710051, China;; 2.National Key Laboratory of Air Traffic Collision Prevention,Xi’an 710051, China;; 3.Unit 94347of the PLA, Shenyang 110043, China;
Abstract:A geometrically optimal conflict detection and resolution method is proposed to make up for the defect of current methods in air traffic control. Firstly, the conflict resolution point of the problem is defined, at which the possible flight conflicts between aircrafts are predicted. Secondly, the same direction same angle is adopted to solve the flight conflicts; that is, the two aircrafts turn the same angle to the same side at the same time on the original track to obtain a new track crossing point, namely a track recovery point. Thus the minimum separation between the two planes is always maintained. Through geometric analysis, the relationship between the sum of the track distances of the two aircrafts and their respective change of heading is theoretically deduced. The model can effectively solve the flight and conflicts, and specifically give the position of the conflict resolution and track recovery, as well as the parameter solving process involved. Finally, the simulation results show that the method is simple and efficient.
Keywords:
点击此处可从《系统工程与电子技术》浏览原始摘要信息
点击此处可从《系统工程与电子技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号