| 基于Petri网的工艺路线优化建模技术 |
| |
| 引用本文： | 于源,卢军,王小椿.基于Petri网的工艺路线优化建模技术[J].系统仿真学报,2001(Z2). |
| |
| 作者姓名： | 于源 卢军 王小椿 |
| |
| 作者单位： | 西安交通大学机械工程学院CAGD及数控研究所 西安710049
(于源，卢军)，西安交通大学机械工程学院CAGD及数控研究所 西安710049(王小椿) |
| |
| 摘 要： | 主要探讨计算机集成系统环境下产品开发中工艺路线的优化问题,在Petri工艺网的基础上引入机床、夹具、刀具等工装的子网对工艺规程进行建模,并对仿真模型的初始、终结状态给出明确定义,使得Petri网仿真模型评估工艺路线更为准确。通过分析网络的可及图,按加工成本对工艺路线进行了优化安排。由于对加工过程建立了数学模型,故其解算可以很方便,可靠。这种分层建模的方法使得工艺决策的每一个阶段都能采用更适合的模型和分析方法,降低了系统实现的难度。
|
| 关 键 词： | 分层建模 Petri网 工艺路线优化 |
Modeling on Optimal Process Planning Based on Petri Net |
| |
| YU Yuan,LU Jun,WANG Xiao-chun.Modeling on Optimal Process Planning Based on Petri Net[J].Journal of System Simulation,2001(Z2). |
| |
| Authors: | YU Yuan LU Jun WANG Xiao-chun |
| |
| Abstract: | This paper mainly discusses optimal process planning in CIMS. A new model based on process planning Petri net is proposed, which takes machine setup and tool change into account. The initial state and finished state of the model are discussed in addition. So the evaluation for process planning is more accurate than ever. Process planning is optimized in this paper in order to minimize the total machining time according to the reachable figure. This method of hierarchical modeling reduces the complicacy of the process planning. |
| |
| Keywords: | hierarchical modeling Petri net optimal process planning |
| 本文献已被 CNKI 等数据库收录！ |
