| 田口方法及其在注塑成型中的应用 |
| |
| 引用本文： | 茆茂,朱先琦.田口方法及其在注塑成型中的应用[J].安徽工程科技学院学报,2014(4):23-26. |
| |
| 作者姓名： | 茆茂 朱先琦 |
| |
| 作者单位： | 安徽工程大学 机械与汽车工程学院,安徽 芜湖,241000 |
| |
| 摘 要： | 本文介绍了田口方法,并将参数设计法、CAE模拟仿真软件Moldflow和有限元前处理软件Hypermesh相结合,对注塑成型工艺参数进行优化.以某电器内的洗涤分水器为例,研究了注塑工艺参数对翘曲变形的影响,实验得出的最佳参数组合可以极大减少翘曲变形.
|
| 关 键 词： | 田口方法 注塑成型 工艺参数 翘曲 |
Taguchi method and its application in inj ection molding |
| |
| MAO Mao,ZHU Xian-qi.Taguchi method and its application in inj ection molding[J].Journal of Anhui University of Technology and Science,2014(4):23-26. |
| |
| Authors: | MAO Mao ZHU Xian-qi |
| |
| Institution: | (Coll. of Mech. ＆ Auto. Engn.,Anhui Polytechnic University, Wuhu 241000, China) |
| |
| Abstract: | Taguchi method is introduced and the inj ection molding process parameters are optimized by combining the parameter design method with Moldflow（a simulation software）and Hypermesh（a finite element software）.This article studies the influence of inj ection molding process parameters on the warp-age by taking the water segregator in an electrical appliance as an example.The optional parameter com-bination gained from the experiment can greatly reduce the warpage. |
| |
| Keywords: | taguchi method inj ection molding process parameters warpage |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
