| 基于PLC控制机床搬运机械手的设计 |
| |
| 引用本文： | 陈华森. 基于PLC控制机床搬运机械手的设计[J]. 贵州科学, 2012, 30(3): 42-46 |
| |
| 作者姓名： | 陈华森 |
| |
| 作者单位： | 成都铁路局贵阳南车辆段,贵阳,550005 |
| |
| 基金项目： | 贵州大学研究生创新基金，校研理工20013号 |
| |
| 摘 要： | 通过对机床工件搬运机械手主要结构和运动形式的探究,以及对机械手的工作过程和控制要求分析,根据机械手动作循环图设计液压系统控制图;并采用欧姆龙控制器系统进行电气部分的软硬件设计,绘制了PLC的外部接线图和单循环自动工作状态流程图,将PLC技术应用于机械手具有整体技术及经济效益。
|
| 关 键 词： | 机械手 液压驱动系统 可编程控制器(PLC) |
Design of Carrying Machine Manipulator Based on PLC |
| |
| CHEN Hua-sen. Design of Carrying Machine Manipulator Based on PLC[J]. Guizhou Science, 2012, 30(3): 42-46 |
| |
| Authors: | CHEN Hua-sen |
| |
| Affiliation: | CHEN Hua-sen (Rolling Stock Section of South Guiyang Station, Chengdu Railway Bureau, Guiyang , Guizhou 550005, China) |
| |
| Abstract: | The hydraulic system control was designed according to the cycle operation of manipulator, through the study of main structures and movement forms of the manipulator and the analysis on working processes and control requirements of the manipulator. The software and hardware design for the electrical part was done by using the Omron controller system. The external wiring diagram and automatic single cycle working state flow chart of the PLC were drawn. The application of PLC to manipulator would have technological and economic benefits. |
| |
| Keywords: | manipulator hydraulic drive system programmable controller |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
