| 气瓶制造公差三维数字图像分析方法 |
| |
| 引用本文： | 李晓玲.气瓶制造公差三维数字图像分析方法[J].科技咨询导报,2014(32):1-5. |
| |
| 作者姓名： | 李晓玲 |
| |
| 作者单位： | 沈阳特种设备检测研究院 辽宁沈阳 110035 |
| |
| 摘 要： | 基于光学三坐标测量系统开发了一套适合气瓶制造公差测量和评价方法。该方法基于光学三维扫描仪、6轴测量臂、计算机辅助测量软件，实现了气瓶制造公差的精确测量。现定于设备条件，目前该方法适用于直径小于1.8m，长度小于5.4m的特种设备产品测量，测量精度小于0.08mm。
|
| 关 键 词： | 三坐标测量系统 气瓶制造公差 三维数字图像分析方法 |
Three Dimensional Digital Image Analysis Methods About Cylinder Manufacturing Tolerance |
| |
| Li XiaoLing.Three Dimensional Digital Image Analysis Methods About Cylinder Manufacturing Tolerance[J].Science and Technology Consulting Herald,2014(32):1-5. |
| |
| Authors: | Li XiaoLing |
| |
| Institution: | Li XiaoLing (Shenyang Institute of Special Equipment Inspection and Research,shenyang Liaoning, 100035,china) |
| |
| Abstract: | Based on the three coordinate measuring system developed a set of suilable for gas cylinder manufacturing lolerance measurement and evaluation method. This method is based on the optical 3 d scanner, 6 axis measuring arm, computer aided measurement software, realizes the accurate measurement of gas cylinders manufacturing tolerance. The method is applicable to diameter less than 1.8 meters, length less than 5.4 meters of cylinder, measurement accuracy is less than 0.08 mm. |
| |
| Keywords: | Three coordinate measuring system Cylinder manufacturing tolerance Three dimensional digital image analysis methods |
| 本文献已被 维普 万方数据 等数据库收录！ |
