首页 | 本学科首页   官方微博 | 高级检索  
     检索      

改进的低渗透底水气藏压裂井见水时间预测公式
引用本文:李晓平,尚颖雪,刘启国,宋力,谭晓华.改进的低渗透底水气藏压裂井见水时间预测公式[J].科技导报(北京),2015,33(9):40-45.
作者姓名:李晓平  尚颖雪  刘启国  宋力  谭晓华
作者单位:1. 西南石油大学油气藏地质及开发工程国家重点实验室, 成都610500;
2. 中国石油川庆钻探工程有限公司钻采工程技术研究院, 广汉618300
基金项目:国家重点基础研究发展计划(973计划)项目(2014CB239205)
摘    要:低渗透底水气藏中的气井在实际生产中需通过压裂改造获得工业产能,预测压裂井见水时间对合理开发该类气藏具有重要指导意义。针对低渗透底水气藏压裂井的渗流特征,将渗流场划分为射孔段及其下部两个部分,以稳态渗流理论为基础,分别建立了符合各区渗流状态的产能方程,结合水锥顶点的运动方程建立了低渗透底水气藏压裂井见水时间预测公式。实例计算表明,压裂井能显著延缓气井见水时间,利用本方法计算的见水时间更接近实际。敏感性分析表明,随气藏打开程度增加,气井见水时间先增大后减小;增大裂缝半长及裂缝导流能力都将延缓气井见水,但增加幅度逐渐降低,存在最优值。

关 键 词:低渗透    底水气藏    压裂井    有限导流    见水时间

A modified prediction equation of water breakthrough time for fractured wells in low permeability gas reservoirs with bottom water
LI Xiaoping,SHANG Yingxue,LIU Qiguo,SONG Li,TAN Xiaohua.A modified prediction equation of water breakthrough time for fractured wells in low permeability gas reservoirs with bottom water[J].Science & Technology Review,2015,33(9):40-45.
Authors:LI Xiaoping  SHANG Yingxue  LIU Qiguo  SONG Li  TAN Xiaohua
Institution:1. State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China;
2. Drilling & Production Engineering Technology Research Institute, Chuanqing Drilling Engineering Company Limited, PetroChina, Guanghan 618300, China
Abstract:Jeopardized by poor reservoir properties, gas wells in low permeability reservoirs with bottom water should be fractured in order to acquire industrial capacities. Therefore, a modified equation for predicting well's water breakthrough time is studied for effectively developing low permeability gas reservoirs with bottom water. Based on the characteristics of seepage flow in fractured wells, the seepage field is divided into two parts, the perforation interval and its lower section. With the aid of steady state seepage theory, productivity equations for all fields are derived respectively. Eventually, a modified prediction equation is established by means of utilizing the motion equation of water cone apex. Case study shows that fracturing will postpone the process of water breakthrough and the time calculated by this article has less error as compared with the value gained by practical production data. The analysis on sensitive factors reveals that each parameter has its optimal value. With the increase of perforation degree, water breakthrough time will increase at first and then decrease. And the larger the fracture half-length and conductivity are, the longer the water breakthrough time will be. However, the increasing rates tend to be reduced gradually.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《科技导报(北京)》浏览原始摘要信息
点击此处可从《科技导报(北京)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号