首页 | 本学科首页   官方微博 | 高级检索  
     检索      

TiO2离子筛的制备及表征
引用本文:李少鹏,张钦辉,孙淑英,尹先升,于建国.TiO2离子筛的制备及表征[J].天津大学学报(自然科学与工程技术版),2007,40(4):453-456.
作者姓名:李少鹏  张钦辉  孙淑英  尹先升  于建国
作者单位:华东理工大学化学工程联合国家重点实验室,上海200237
基金项目:国家自然科学基金;上海市纳米科技专项基金;上海市科委资助项目
摘    要:采用商品二氧化钛(P25)经过改性、浸渍、焙烧、酸洗和干燥过程制备离子筛,并通过X-射线衍射对样品晶相结构进行了表征,进一步对锂离子的吸附性能进行了研究.结果表明,P25在1173K、焙烧8h后得到了锐钛相TiO2,进一步得到对锂离子具有特殊记忆效应的离子筛;随着浸渍过程Li与Ti摩尔比的增加,前驱体中Li—Ti—O固熔体的量逐渐增加,主要物质为立方晶系的Li1.33Ti1.66O4;经酸浸脱得到的离子筛为锐钛相TiO2,对锂离子的平衡吸附量达到0.7mmol/g.

关 键 词:二氧化钛  离子筛  锂离子  吸附  分离
文章编号:0493-2137(2007)04-0453-04
修稿时间:2006-11-082006-12-29

Preparation and Characterization of Titania Ion-Sieves
LI Shao-peng,ZHANG Qin-hui,SUN Shu-ying,YIN Xian-sheng,YU Jian-guo.Preparation and Characterization of Titania Ion-Sieves[J].Journal of Tianjin University(Science and Technology),2007,40(4):453-456.
Authors:LI Shao-peng  ZHANG Qin-hui  SUN Shu-ying  YIN Xian-sheng  YU Jian-guo
Institution:State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
Abstract:Titania ion-sieves were prepared through the process of transnaturing,impregnation,calcination,acid treatment,and dryness of commercial titania(P25).The crystal structure and lithium ion adsorption capacity were characterized by X-ray diffraction(XRD) and adsorption kinetics measurement,respectively.The results show that the commercial titania changes to rutile form of TiO2 after calcination for 8 h at 1 173 K;with the increase of molar ratio of Li to Ti in the precursor,the content of Li-Ti-O solid fusion increases and mainly presents the cubic form of Li1.33Ti1.66O4;after nitric acid treatment,the titania ion-seives with rutile phase were prepared and the equilibrium adsorption amount of lithium ion is 0.7 mmol/g.
Keywords:titania(TiO2)  ion-sieve  lithium ion  adsorption  separation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号