| 49mm×51mm异形方钢的热轧成型技术 |
| |
| 引用本文： | 彭仁树,吴春京.49mm×51mm异形方钢的热轧成型技术[J].科技咨询导报,2011(22):53-54,56. |
| |
| 作者姓名： | 彭仁树 吴春京 |
| |
| 作者单位： | 北京科技大学材料科学与工程学院;湖北新冶钢有限公司二轧钢厂; |
| |
| 摘 要： | 在湖北新冶钢有限公司二轧钢厂500/半连轧机组上,采用无孔型热轧工艺生产宽厚比非常接近的异形方钢,经多次试验和改进,生产成功,其关键成型技术是鼓形宽展的控制。
|
| 关 键 词： | 49mm×51mm 异形方钢 热轧 成型技术 |
49mm×51mm Special-shaped Square Steel Hot-rolled Molding Technology |
| |
| Peng Renshu, Wu Chunjing.49mm×51mm Special-shaped Square Steel Hot-rolled Molding Technology[J].Science and Technology Consulting Herald,2011(22):53-54,56. |
| |
| Authors: | Peng Renshu Wu Chunjing |
| |
| Institution: | Peng Renshu1,2 Wu Chunjing1(1.School of Materials Sciencs and Engineering,University of Science and Technology Beijing,Beijing 100083,2 No.2 Rolling Factory,Hubei Xinyegang Steel Co.,Ltd.Huangshi 435001) |
| |
| Abstract: | In the 500/semi-continuous rolling mill group of No.2 Rolling Factory,Hubei Xinyegang Steel Co.,Ltd.,uses non-pass hot rolling process production special-shaped square steel of compared to the very close in width and side,after experiments many times and improves,produces successfully,its key molding technology is the control which the drum shape spreads. |
| |
| Keywords: | 49mm×51mm Special-shaped Square Steel Hot rolling Molding Technology |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
