| Fe－SiC复合镀的工艺研究 |
| |
| 引用本文： | 陈素贤,郭丽娟,周兴久.Fe－SiC复合镀的工艺研究[J].大连理工大学学报,1995(2). |
| |
| 作者姓名： | 陈素贤 郭丽娟 周兴久 |
| |
| 作者单位： | 大连理工大学材料工程系 |
| |
| 摘 要： | 研究了采用氯化亚铁为主盐，悬浮Ｓｉｃ微粒的低温直流复合镀工艺．详细介绍了镀液中ＳｉＣ浓度、镀液主盐浓度、镀液温度、镀液ｐＨ值、阴极电流密度及搅拌间歇时间等工艺参数对复合镀层中ＳｉＣ含量的影响，并以复合镀层性能，如结合强度、硬度、耐磨性等为考察参数，确定了Ｆｅ－ＳｉＣ复合镀层中ＳｉＣ的最佳含量．
|
| 关 键 词： | 镀覆／复合镀，低温镀铁，第二相粒子 |
Technology of Fe-SiC composite plating |
| |
| Chen Shuxian,Guo Lijuan,Zhou Xingjiu.Technology of Fe-SiC composite plating[J].Journal of Dalian University of Technology,1995(2). |
| |
| Authors: | Chen Shuxian Guo Lijuan Zhou Xingjiu |
| |
| Abstract: | temperature direct current composite plating technology which adopts the FeCl_2solution suspending SiC particles is studied,It is stated in detail that the SiC content in composite coating is influenced by the technology parameters as follows: SiC concentration,FeCl_2 density temperature,pH value in composite solution,cathede current density and agitating interval time.So the propertles of composite plating such as ajointing strength,hardness and wear resistance are investigated so as to obtain the optimal SiC content in Fe-SiC composite plating. |
| |
| Keywords: | plating/composite plating low temperature iron-plating the second phase particle |
| 本文献已被 CNKI 等数据库收录！ |
