首页 | 本学科首页   官方微博 | 高级检索  
     

不同分子量聚合物溶液在多孔介质中的渗流特性研究
引用本文:吴文祥,张向宇. 不同分子量聚合物溶液在多孔介质中的渗流特性研究[J]. 西安石油大学学报(自然科学版), 2007, 22(2): 103-106
作者姓名:吴文祥  张向宇
作者单位:大庆石油学院,提高油气采收率教育部重点实验室,黑龙江,大庆,163318
摘    要:通过岩心流动实验,探讨了部分水解聚丙烯酰胺溶液(HPAM)在多孔介质中流动时聚合物分子量和孔隙特征参数对流动行为的影响,得到了一组反映流动参数变化规律的关系曲线。结果表明,在消除黏度效应条件下,高分子量聚合物比低分子量聚合物降低水相渗透率的能力强;聚合物分子量越高,多孔介质渗透率越低,阻力系数和残余阻力系数越大,聚合物越早突破多孔介质;当平均孔隙半径与聚合物分子尺寸之比大于4时,多孔介质的孔隙通道一般不会发生聚合物堵塞.

关 键 词:聚合物溶液  黏度  分子量  流动特性
文章编号:1673-064X(2007)02-0103-04
修稿时间:2006-11-28

Seepage characteristics of the polymer solutions of different molecular masses in porous media
WU Wen-xiang,ZHANG Xiang-yu. Seepage characteristics of the polymer solutions of different molecular masses in porous media[J]. Journal of Xian Shiyou University, 2007, 22(2): 103-106
Authors:WU Wen-xiang  ZHANG Xiang-yu
Abstract:The effects of the molecular mass of partially hydrolyzed polyacrylamide and the characteristic dimension of the pores in porous medium on the flow performance of the partially hydrolyzed polyacrylamide solution in the porous medium are discussed by core flow experiments,and a set of parameter vary law curves are obtained.It is shown that under the condition of eliminating viscosity effect,high molecular polymer can more effectively decrease the permeability of water phase than low molecular polymer;the higher the molecular mass of polymer and the lower the permeability of the porous medium,the greater the flow resistance factor and residual resistance factor and the earlier the polymer solution breaks through the porous medium;when the ratio of the average radius of the pores in the porous medium to the gyration radius of the polymer molecules is greater than 5,the pore tunnel of the porous medium will not generally be plugged by the polymer.
Keywords:polymer solution  viscosity  molecular mass  porous medium  flow characteristic
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号