| Ng10二通插装阀结构形状及参数的试验研究 |
| |
| 引用本文： | 常云发,胡燕海,应小刚,蔡国飞.Ng10二通插装阀结构形状及参数的试验研究[J].上海理工大学学报,1993(2). |
| |
| 作者姓名： | 常云发 胡燕海 应小刚 蔡国飞 |
| |
| 作者单位： | 上海机械学院，宁波大学，宁波大学，宁波大学 热能工程82届硕士研究生 宁波大学 |
| |
| 摘 要： | 本文提出了测量Ng10二通插装阀静,动态性能的试验方法,测试了阀套开口形状、各种尾部结构的阀芯、阀芯行程、阀芯锥度、控制盖板阻尼孔尺寸等结构形状参数对插装阀静、动态性能的影响,并对试验结果进行了对比分析.在此基础上.确定了本文述及条件下的最佳结构形状和参数.
|
| 关 键 词： | 插装阀 结构形状 结构参数 性能 试验研究 |
A TEST RESEARCH ON STRUCTURE SHAPE AND PARAMETERS OF Ng10 2/2CV |
| |
| Chang Yunfa Hu Yanhai Ying Xiaogang Chai Guofei.A TEST RESEARCH ON STRUCTURE SHAPE AND PARAMETERS OF Ng10 2/2CV[J].Journal of University of Shanghai For Science and Technology,1993(2). |
| |
| Authors: | Chang Yunfa Hu Yanhai Ying Xiaogang Chai Guofei |
| |
| Institution: | Chang Yunfa Hu Yanhai Ying Xiaogang Chai Guofei |
| |
| Abstract: | In this paper the authors put forward the method of testing static and dynamic performance of Ng10 2/2CV and the influence of some kinds of fundamental parameters such as main value seat hole shape, spool with some kinds of structure, spool's itinerary, spool's coning, orifice diameter of control cover plate etc on static and dynamic performance of Ng10 2/2CV. The test has been performed, and the contrastive analysis for the test result has been made. Based on this, the best structure shape and structure parameters have been set up under the conditions in this paper. |
| |
| Keywords: | Cartridge Valve (CV) Structure shape Struture parameters Performance Test research |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海理工大学学报》浏览原始摘要信息 |
| 点击此处可从《上海理工大学学报》下载免费的PDF全文 |
