| 油液弹性模量对高压叶片泵性能的影响 |
| |
| 引用本文： | 冀宏,王峥嵘,李少年,张玮. 油液弹性模量对高压叶片泵性能的影响[J]. 兰州理工大学学报, 2006, 32(6): 65-67 |
| |
| 作者姓名： | 冀宏 王峥嵘 李少年 张玮 |
| |
| 作者单位： | 兰州理工大学,流体动力与控制学院,甘肃,兰州,730050;兰州理工大学,流体动力与控制学院,甘肃,兰州,730050;兰州理工大学,流体动力与控制学院,甘肃,兰州,730050;兰州理工大学,流体动力与控制学院,甘肃,兰州,730050 |
| |
| 基金项目： | 国家自然科学基金(50605030),甘肃省自然科学基金(3ZS042-B25-010) |
| |
| 摘 要： | 输出流量均匀性和噪声等级是衡量泵性能的重要参数.从分析叶片工作腔压力变化出发,对泵的工作腔预升压过程进行了建模,计算出了预升压工作腔的压力、压力梯度及泵的瞬时流量随油液的体积弹性模量变化的曲线.结果表明,随着油液体积弹性模量的下降,泵的流量脉动及流体噪声均增大.在实际使用中可以通过充分去除油液中的气泡、减小配流气穴,提高油液体积弹性模量,减小流体噪声.
|
| 关 键 词： | 高压叶片泵 体积弹性模量 压力梯度 流量脉动 |
| 文章编号： | 1673-5196(2006)06-0065-03 |
| 收稿时间： | 2006-09-05 |
| 修稿时间： | 2006-09-05 |
Influence of oil bulk modulus on performance of high-pressure vane pump |
| |
| JI Hong,WANG Zheng-rong,LI Shao-nian,ZHANG Wei. Influence of oil bulk modulus on performance of high-pressure vane pump[J]. Journal of Lanzhou University of Technology, 2006, 32(6): 65-67 |
| |
| Authors: | JI Hong WANG Zheng-rong LI Shao-nian ZHANG Wei |
| |
| Affiliation: | College of Fluid Power and Control, Lanzhou Univ. of Tech., Lanzhou 730050, China |
| |
| Abstract: | The noise level and discharge uniformity are important parameters for assessing the performance of hydraulic pump.The pressure transient in pre-loading chamber of a high-pressure vane pump was modeled. The graphs of pressure transients,pressure gradient and instantaneous flow varying with the bulk modulus of oil elasticity were figured out. It was shown by calculation results that the flow ripple and fluid noise of hydraulic pump increased seriously when the bulk modulus descended.In practical application,the fluid noise of hydraulic pump could be reduced by means of removing the dissolved air in oil and suppressing the cavitaion in pump. |
| |
| Keywords: | high-pressure vane pump bulk modulus pressure gradient flow ripple |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
