| Ti-Mg混合粉末的机械合金化过程 |
| |
| 引用本文： | 陈秀娟,李泽敏,李建伟.Ti-Mg混合粉末的机械合金化过程[J].兰州理工大学学报,2008,34(4). |
| |
| 作者姓名： | 陈秀娟 李泽敏 李建伟 |
| |
| 作者单位： | 1. 兰州理工大学,机电工程学院,甘肃,兰州,730050;兰州理工大学,甘肃省有色金属新材料重点实验室,甘肃,兰州,730050
2. 兰州理工大学,材料科学与工程学院,甘肃,兰州,730050 |
| |
| 摘 要： | 采用机械合金化方法,用行星式高能球磨机对Ti-Mg混合粉末进行机械合金化过程研究,用X射线衍射分析球磨的合金粉末结构,并用扫描电子显微镜分析样品的形貌和粒度.XRD分析结果表明,机械合金化可使Ti和Mg产生固溶体,且经过48 h球磨的Ti-Mg合金中未发现Mg的衍射峰,Mg溶入到Ti中,加宽和分散了Ti衍射峰,从扫描电镜的结果知道粉末颗粒很细,但聚集成团.
|
| 关 键 词： | Ti-Mg混合粉末 X射线衍射 扫描电镜 |
Process of mechanical alloying of Ti-Mg powder mixtures |
| |
| CHEN Xiu-juan,LI Ze-min,LI Jian-wei.Process of mechanical alloying of Ti-Mg powder mixtures[J].Journal of Lanzhou University of Technology,2008,34(4). |
| |
| Authors: | CHEN Xiu-juan LI Ze-min LI Jian-wei |
| |
| Abstract: | The process of mechanical alloying of Ti-Mg alloy was investigated by using mechanical alloying method and a high-energy planet ball-milling of Ti and Mg.The structure and morphology of milled powder mixtures of Ti and Mg were analyzed with X-ray diffraction and SEM,respectively.The results showed that the Ti-Mg solid solution could be generated thereby.X-ray observation showed that there was no diffraction peak of Mg in the Ti-Mg alloy after ball-milling for 48 h.Mg dissolved first in the grain boundaries of the Ti,and then the XRD peaks of Ti was broadened.It was found by observing the morphology of the alloy with scanning electronic microscope that the particles of powder were very fine and in the form of aggregation. |
| |
| Keywords: | Ti-Mg powder mixtures X-ray diffraction scanning electronic microscope |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
