|
|||||
|
|
| 含氮316L不锈钢氮合金化工艺研究 | |
| 引用本文： | 崔衡,董志平,时颜林,李实,杜建新,刘竑,包燕平. 含氮316L不锈钢氮合金化工艺研究[J]. 北京科技大学学报, 2009, 0(Z1) |
| 作者姓名： | 崔衡 董志平 时颜林 李实 杜建新 刘竑 包燕平 |
| 作者单位： | 北京科技大学冶金工程研究院;宝山钢铁股份有限公司不锈钢事业部; |
| 基金项目： | “十一五”国家科技支撑计划资助项目(2006BAE03A06) |
| 摘 要： | 在常压和真空条件下研究了温度与氮分压对316L不锈钢中氮溶解度的影响,钢中氮的溶解度随着温度的降低而升高,随着氮分压的增大而增大.建立了316L不锈钢氮溶解度热力学计算模型,不同吹氮条件下氮溶解度实测值与热力学模型计算值较吻合.在1773～1873K条件下,生产控氮型316L不锈钢,氮分压要控制在6～28kPa以上;生产中氮型316L不锈钢,氮分压要控制在22～101kPa以上.常压下吹氮10min,钢液含氮量即可超过0.10%. |
| 关 键 词： | 氮溶解度 热力学计算 316L不锈钢 |
Study on the nitrogen alloying process of nitrogen-contained 316 L stainless steel |
|
| CUI Heng),DONG Zhi-ping),SHI Yan-lin),LI Shi),DU Jian-xin),LIU Hong),BAO Yan-ping)) Engineering Research Institute,University of Science , Technology Beijing,Beijing ,China) Baoshan Iron , Steel Co. Ltd.,Stainless Steel Branch,Shanghai ,China. Study on the nitrogen alloying process of nitrogen-contained 316 L stainless steel[J]. Journal of University of Science and Technology Beijing, 2009, 0(Z1) | |
| Authors: | CUI Heng) DONG Zhi-ping) SHI Yan-lin) LI Shi) DU Jian-xin) LIU Hong) BAO Yan-ping)) Engineering Research Institute University of Science Technology Beijing Beijing China) Baoshan Iron & Steel Co. Ltd. Stainless Steel Branch Shanghai China |
| Affiliation: | CUI Heng1),DONG Zhi-ping2),SHI Yan-lin1),LI Shi2),DU Jian-xin1),LIU Hong2),BAO Yan-ping1)1) Engineering Research Institute,University of Science , Technology Beijing,Beijing 100083,China2) Baoshan Iron & Steel Co. Ltd.,Stainless Steel Branch,Shanghai 200431,China |
| Abstract: | The influences of liquid steel temperature and nitrogen partial pressure on the nitrogen solubility in 316 L stainless steel under normal atmosphere and vacuum were studied. The nitrogen solubility increased with decreasing the liquid steel temperature or increasing the nitrogen partial pressure. A thermodynamic model was developed to calculate the nitrogen solubility in 316 L stainless steel,and the calculated results were in coincidence with the measurement results under different nitrogen blowing process... |
| Keywords: | nitrogen solubility thermodynamic calculation 316 L stainless steel |
| 本文献已被 CNKI 等数据库收录！ | |