| 基于MIMICS的含内腔结构零件逆向设计 |
| |
| 引用本文： | 盛选禹,王联奎.基于MIMICS的含内腔结构零件逆向设计[J].科技导报(北京),2009,27(7). |
| |
| 作者姓名： | 盛选禹 王联奎 |
| |
| 作者单位： | 盛选禹,SHENG Xuanyu(清华大学核能与新能源技术研究院,北京,100084);王联奎,WANG Liankui(菏泽学院机电工程系,山东菏泽,274100)
|
| |
| 摘 要： | 对具有复杂内腔结构的发动机零件实体进行了逆向工程设计.首先利用工业CT机对含有内腔结构的发动机零件进行扫描;将扫描的截面图片导入医学软件MIMICS中,并导出转换为STL格式的云点模型;利用大型设计软件CATIA的逆向设计功能,将云点图像转换为三维实体模型.通过上述方法,实现了对含有内腔结构的发动机零件进行了逆向设计,得到了发动机零件的实际结构尺寸,解决了激光扫描只能扫描零件外表面轮廓的不足,可用于其他具有复杂内腔结构零件的逆向设计.但由于CT扫描图片的精度偏低,因此,需对模型进行处理后才能用于工程实际加工.
|
| 关 键 词： | 逆向工程 CT照片 三维模型 发动机 |
Reverse Engineering Design for Parts with Cavum Structure Based on MIMICS |
| |
| SHENG Xuanyu,WANG Liankui.Reverse Engineering Design for Parts with Cavum Structure Based on MIMICS[J].Science & Technology Review,2009,27(7). |
| |
| Authors: | SHENG Xuanyu WANG Liankui |
| |
| Institution: | SHENG Xuanyu1,WANG Liankui2 1.Institute of Nuclear , New Energy Technology,Tsinghua University,Beijing 100084,China 2.Department of Mechanical , Electrical Engineering,Heze University,Heze 274100,Sh,ong Province,China |
| |
| Abstract: | Reverse Engineering(RE)Design is to determine dimensions of an object that already exists and to manufacture copies with the same dimensions accordingly.In this paper,reverse engineering design was carried out for an engine part with a complicated cavum structure.With traditional RE method,laser is used to scan and measure the real components.But it can only scan the profile and simple holes of the component.For components with complicated cavum structure,the laser scan method will fail.The component discus... |
| |
| Keywords: | reverse engineering CT photo 3 dimensional model engine |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
