首页 | 本学科首页   官方微博 | 高级检索  
     检索      

用激光同时测量玻璃管外径和壁厚的方法
引用本文:陈兴梧,刘鸣,赵煜,赵慧影.用激光同时测量玻璃管外径和壁厚的方法[J].天津大学学报(自然科学与工程技术版),2002,35(5):631-633.
作者姓名:陈兴梧  刘鸣  赵煜  赵慧影
作者单位:天津大学精密仪器与光电子工程学院 天津300072 (陈兴梧,刘鸣,赵煜),天津大学精密仪器与光电子工程学院 天津300072(赵慧影)
摘    要:提出了一种用激光同时测量玻璃管外径和壁厚的方法。当位于含玻璃管轴线垂直到面内的一束激光与玻璃管轴线成一定角度入射到玻璃管时,经玻璃管内、外表面反射和管壁折射后,产生了能够代表外径和壁厚的光信息,再通过光电传感器CCD将其转换成电信号,由硬件电路放大预处理与数字化后送入计算机,经过运算处理后则同时得到了玻璃管的外径值和壁厚值。

关 键 词:激光测量  玻璃管  外径  壁厚  激光扫描测控系统  光电传感器  测量原理
文章编号:0493-2137(2002)04-0631-03
修稿时间:2001年12月25

Method for Simultaneously Measuring the Wall Thickness and External Diameter of Glass Tube
CHEN Xing-wu,LIU Ming,ZHAO Yu,ZHAO Hui-ying.Method for Simultaneously Measuring the Wall Thickness and External Diameter of Glass Tube[J].Journal of Tianjin University(Science and Technology),2002,35(5):631-633.
Authors:CHEN Xing-wu  LIU Ming  ZHAO Yu  ZHAO Hui-ying
Abstract:Method for measuring a wall thickness and external diameter of glass tube simultaneously is introduced in this article.When a beam of laser which is located in the vertical section containing the axis of glass tube project to the glass tube at an angle to its axis, after reflected by the internal and external surface and refracted by the wall of tube, the photo information that represents the external diameter and thickness can be produced and transferred into electric signal by the photo electricity sensor CCD.After amplified,preprocessed and digitized by hardware circuit,the signal enters into the computer and is processed thus the wall thickness and external diameter can be obtained simultaneously.
Keywords:laser  glass tube  external diameter  wall thickness
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号