| 深水铺管船用张紧器液压夹紧系统建模与仿真 |
| |
| 引用本文： | 张俊亮,刘文利,陈翠和,王凯坡.深水铺管船用张紧器液压夹紧系统建模与仿真[J].系统仿真学报,2010,22(2). |
| |
| 作者姓名： | 张俊亮 刘文利 陈翠和 王凯坡 |
| |
| 作者单位： | 1. 中国石油大学(北京)北京,102249
2. 海洋石油工程股份有限公司,天津,300450 |
| |
| 基金项目： | 国家863项目(2006AA09A105) |
| |
| 摘 要： | 综合考虑3000m水深铺管船用张紧器的工作过程及参数要求,设计液压夹紧系统为管线提供夹紧力并确定液压系统元件参数。利用AMESim软件建立仿真模型,并对液压缸快进、工进、保压、快退四个工作阶段及同步性进行仿真分析,除快进阶段液压缸存在速度波动外,其余三个阶段运行平稳;采用PID控制使液压缸具有良好的同步性,并通过分析液压缸动态特性,对液压系统进行优化。仿真结果表明液压夹紧系统基本满足张紧器工作要求。
|
| 关 键 词： | 铺管船用张紧器 液压夹紧系统 AMESim 仿真 |
Modeling and Simulation of Hydraulic Clamping System of Tensioner for Deep Water Pipelaying Vessel |
| |
| ZHANG Jun-liang,LIU Wen-li,CHEN Cui-he,WANG Kai-po.Modeling and Simulation of Hydraulic Clamping System of Tensioner for Deep Water Pipelaying Vessel[J].Journal of System Simulation,2010,22(2). |
| |
| Authors: | ZHANG Jun-liang LIU Wen-li CHEN Cui-he WANG Kai-po |
| |
| Institution: | ZHANG Jun-liang1,LIU Wen-li2,CHEN Cui-he2,WANG Kai-po2 (1.China University of Petroleum,Beijing 102249,China,2.Offshore Oil Engineering Co.Ltd.,Tianjin 300450,China) |
| |
| Abstract: | With integrated consideration of working process and parameters of tensioner for pipelaying vessel with the water being 3000meters deep,a hydraulic clamping system was designed to clamp pipe,and its components parameters were obtained.The simulating model was created based on AMESim software,then the corresponding simulation of hydraulic cylinder on the stage of fast-forward press pressure maintaining quick return and synchronism was shown,besides the speed fluctuation during the stage of fast-forward,the o... |
| |
| Keywords: | tensioner for pipelaying vessel hydraulic clamping system AMESim simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
