首页 | 本学科首页   官方微博 | 高级检索  
     检索      

短路铜熔珠形态特征分析与定量研究
引用本文:杨晓红,孟广伊,邸曼,马子宁.短路铜熔珠形态特征分析与定量研究[J].河南师范大学学报(自然科学版),2012,40(3):69-72.
作者姓名:杨晓红  孟广伊  邸曼  马子宁
作者单位:1. 沈阳工程学院基础部,沈阳,110136
2. 公安部沈阳消防研究所,沈阳,110034
3. 中国刑警学院,沈阳,110035
摘    要:通过模拟实验制作电气火灾中短路铜熔珠实验样品,利用扫描电镜(SEM)观察其表面和横截面,对其内部孔洞的微观形态进行定性分析与定量研究.找到可供鉴别的特征参量:气孔直径D、孔洞数密度N和面积比S/S面,达到根据特征参量判断铜熔珠形成与电气火灾关系的研究目的.应用X-射线能谱仪(EDS)对其表面成分进行分析,给出一,二短路铜熔珠表面成分差异的结论.

关 键 词:电气火灾  扫描电镜  X-射线能谱仪  特征参量

Morphological Characteristics of the Melted Beads in Copper Short-circuit and its Quantitative Research
YANG Xiao-hong , MENG Guang-yi , DI Man , MA Zi-ning.Morphological Characteristics of the Melted Beads in Copper Short-circuit and its Quantitative Research[J].Journal of Henan Normal University(Natural Science),2012,40(3):69-72.
Authors:YANG Xiao-hong  MENG Guang-yi  DI Man  MA Zi-ning
Institution:1.Department of Preparatory Course,Shenyang Institute of Engineering,Shenyang 110136,China;2.Shengyang Fire Research Institute of Ministry for Public Security,Shenyang 110034,China;3.China Criminal Police University,Shengyang 110035,China)
Abstract:Experimental specimen of the short-circuits copper melted beads in the electric fire are made by simulation experiments.The microstructural morphological characteristics of the poles in short-circuits copper melted trace is qualitatively analyzed and quantitatively researched by observing their cross-sections by SEM.The result shows that based on characteristic parameters,such as diameter of pores,number density of poles and area ratio,the relationship between the formation of the copper melted beads and electric fire disaster can be judged.The composition of its surface is analyzed by EDS,and the conclusion is surface composition differences between the copper melted beads of primary and secondary short-circuits in the electric fire.
Keywords:electric fire  SEM  EDS  characteristic parameter
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号