| 装配机械手综合误差分析与误差元素建模研究 |
| |
| 引用本文： | 倪骁骅,刘青,程冲.装配机械手综合误差分析与误差元素建模研究[J].盐城工学院学报(自然科学版),2013,26(2):5-8. |
| |
| 作者姓名： | 倪骁骅 刘青 程冲 |
| |
| 作者单位： | [1]盐城工学院机械工程学院,江苏盐城224001 [2]江苏大学机械工程学院,江苏镇江212013 |
| |
| 摘 要： | 以矩阵变换为基础,分析装配机械手的综合误差,导出末端误差表达式,得出末端误差与各关节误差源之间的关系,采用回归分析方法建立误差元素的模型。实测误差数据建模曲线与软件仿真误差元素模型曲线对比表明,采用该方法所建模型曲线更接近实际。
|
| 关 键 词： | 装配机械手 误差分析 误差元素 建模 仿真 |
Research on Comprehensive Error Analysis and Error Term Modeling of Assembling Manipulator |
| |
| NI Xiao-hu,LIU Qing,CHENG Chong.Research on Comprehensive Error Analysis and Error Term Modeling of Assembling Manipulator[J].Journal of Yancheng Institute of Technology(Natural Science Edition),2013,26(2):5-8. |
| |
| Authors: | NI Xiao-hu LIU Qing CHENG Chong |
| |
| Institution: | 1.School of Mechanical Engineering, Yaneheng Institute of Technology, Yaneheng Jiangsu 224051,China; 2. School of Meehanieal Engineering, Jiangsu University, Zhenjiang Jiangsu 212013 ,China) |
| |
| Abstract: | Based on matrix transform, comprehensive error of assembling manipulator was analyzed, terminal error formula was derived, and the relationship between terminal error and every error source of each joint was obtained. The model of each of the error sources was established through regression analysis. By experiment, error curve with actual measurement dada based on regression analysis is superior to the error curve calculated by the simulation software. |
| |
| Keywords: | assembling manipulator error analysis error term model simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《盐城工学院学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《盐城工学院学报(自然科学版)》下载免费的PDF全文 |
|
