| 基于ANSYS的镁合金铸轧辊冷却研究 |
| |
| 引用本文： | 宋黎,孙斌煜,崔鹏鹏,郝豫宝,乔东洋.基于ANSYS的镁合金铸轧辊冷却研究[J].上海理工大学学报,2017,38(3):144-148. |
| |
| 作者姓名： | 宋黎 孙斌煜 崔鹏鹏 郝豫宝 乔东洋 |
| |
| 作者单位： | 太原科技大学山西省冶金设备设计理论与技术重点实验室, 山西 太原 030024,太原科技大学山西省冶金设备设计理论与技术重点实验室, 山西 太原 030024,太原科技大学山西省冶金设备设计理论与技术重点实验室, 山西 太原 030024,太原科技大学山西省冶金设备设计理论与技术重点实验室, 山西 太原 030024,太原科技大学山西省冶金设备设计理论与技术重点实验室, 山西 太原 030024 |
| |
| 基金项目： | 国家重点基础研究发展计划（973计划）资助项目（2012CB722801）；山西省科技创新项目（201301013）；太原市科技项目（200669）；山西省UIT项目（2016-274）；太原市专利转化项目（1224，1225） |
| |
| 摘 要： | 利用ANSYS有限元软件，对铸轧辊建立二维模型来模拟铸轧辊在镁合金铸轧过程中的温度场分布.通过分析不同冷却水温度及冷却水速下铸轧辊温度场的分布情况，得出在镁合金铸轧过程中，提高冷却水速可以降低铸轧辊的温度场，但随着冷却水速的提高，这种能力逐渐减弱；而冷却水温度对铸轧辊温度场影响不大.
|
| 关 键 词： | 镁合金 温度场 铸轧辊冷却 冷却水温度 冷却水速 |
| 收稿时间： | 2016/11/8 0:00:00 |
Cooling Research of Magnesium Alloy Casting-roll Using ANSYS Software |
| |
| SONG Li,SUN Binyu,CUI Pengpeng,HAO Yubao and QIAO Dongyang.Cooling Research of Magnesium Alloy Casting-roll Using ANSYS Software[J].Journal of University of Shanghai For Science and Technology,2017,38(3):144-148. |
| |
| Authors: | SONG Li SUN Binyu CUI Pengpeng HAO Yubao and QIAO Dongyang |
| |
| Institution: | Shanxi Key Laboratory of Metallurgical Equipment Design Theory and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China,Shanxi Key Laboratory of Metallurgical Equipment Design Theory and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China,Shanxi Key Laboratory of Metallurgical Equipment Design Theory and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China,Shanxi Key Laboratory of Metallurgical Equipment Design Theory and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China and Shanxi Key Laboratory of Metallurgical Equipment Design Theory and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China |
| |
| Abstract: | A two dimensional model of casting-roll was established by using ANSYS finite element software.The model is used to simulate the temperature distribution of casting-roll in the casting process of magnesium alloy.The temperature distribution of casting-roll is analyzed under different cooling water temperature and cooling water speed.It is concluded that increasing the cooling water speed can reduce the thermal field of casting-roll.However,with the increase of the cooling water speed,this ability is gradually weakened and the cooling water temperature has little effect on the thermal field of the casting-roll. |
| |
| Keywords: | magnesium alloy theraml field cooling of casting-roll cooling water temperature cooling water speed |
|
| 点击此处可从《上海理工大学学报》浏览原始摘要信息 |
| 点击此处可从《上海理工大学学报》下载免费的PDF全文 |
|
