| 20SiMn钢冲蚀和空蚀的失效行为研究 |
| |
| 引用本文： | 王再友,陈黄浦,徐英鸽,朱金华. 20SiMn钢冲蚀和空蚀的失效行为研究[J]. 西安交通大学学报, 2002, 36(7): 744-747 |
| |
| 作者姓名： | 王再友 陈黄浦 徐英鸽 朱金华 |
| |
| 作者单位： | 西安交通大学金属材料强度国家重点实验室,710049,西安 |
| |
| 基金项目： | 国家自然科学基金重点资助项目 (5 98310 30 )，国家“九七三”计划资助项目 (G19990 6 5 0 ) |
| |
| 摘 要： | 用CMS 12 0旋臂式真空冲蚀试验机和KS 6 0振动空蚀磁致伸缩仪对 2 0SiMn钢 90°攻角冲蚀和空蚀进行了试验研究 .结果表明 :2 0SiMn钢冲蚀分为孕育期、增重期和稳定期 3个阶段 ;空蚀由孕育期、急剧上升期、衰减期和稳定期 4个阶段组成 ;冲蚀、空蚀裂纹主要沿晶界萌生和扩展 ,失效机制是因局部微区机械力作用造成沿晶断裂和晶内蚀坑 ;晶粒脱落是空蚀的重要失效方式之一 .
|
| 关 键 词： | 20SiMn钢 失效行为 冲蚀 空蚀 失效机制 沿晶断裂 晶内蚀坑 晶粒脱落 |
| 文章编号： | 0253-987X(2002)07-0744-04 |
| 修稿时间： | 2001-10-12 |
Failure Behavior of 20SiMn Steel in Erosion and Cavitation Erosion Processes |
| |
| Wang Zaiyou,Chen Huangpu,Xu Yingge,Zhu Jinhua. Failure Behavior of 20SiMn Steel in Erosion and Cavitation Erosion Processes[J]. Journal of Xi'an Jiaotong University, 2002, 36(7): 744-747 |
| |
| Authors: | Wang Zaiyou Chen Huangpu Xu Yingge Zhu Jinhua |
| |
| Abstract: | Using a CMS 120 whirling arm vacuum erosion rig and KS 60 vibratory cavitation magnetostrictive instrument, tests on erosion at impact angle of 90 degrees and cavitation erosion for the 20SiMn (0 2%C 0 6%Si Mn) steel were carried out. The results show that the erosion process of the steel is divided into three stages incubation, mass increase and steady periods; and its cavitation erosion process consists of four stages incubation, accumulation, attenuation and stationary periods. Cracks principally initiate and propagate along crystal boundaries both in erosion and cavitation erosion processes, and the failure mechanisms are intergranular failure and etching pits in grain interior due to local microzone mechanical effect. Crystal grain's peeling off is one of the major failure modes in cavitation erosion process. |
| |
| Keywords: | erosion cavitation erosion failure mechanism intergranular failure etching pit |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
