首页 | 本学科首页   官方微博 | 高级检索  
     

涤纶长丝织物在染整加工中缩率的变化
引用本文:杨艳菲,崔世忠,郑天勇,汪青. 涤纶长丝织物在染整加工中缩率的变化[J]. 西安工程科技学院学报, 2006, 20(6): 687-691
作者姓名:杨艳菲  崔世忠  郑天勇  汪青
作者单位:中原工学院纺织学院,河南郑州450007
摘    要:涤纶织物在染整加工过程中,受到各种工艺条件的复合作用,从而使得产品在外部形态及结构尺寸上不断发生变化.为了确切反映染整加工中每道工序对织物形态的影响,实验模拟了不同品种的涤纶长丝织物的染整工艺,分别考察各工序处理后织物缩率的变化.结果发现,各个工序对织物的缩率有不同程度的影响,织物在整个染整工艺过程中的总缩率随着热定型温度的升高而增加;影响织物收缩的因素包括热、湿和碱,其中热、湿的作用最为显著.

关 键 词:涤纶长丝织物  染整加工  缩率  织物形态  热定型温度
文章编号:1671-850X(2006)06-0687-05
修稿时间:2006-01-12

The shrinkage rate changes of polyester filament fabric during the dyeing and finishing process
YANG Yan-fei,CUI Shi-zhong,ZHENG Tian-yong,WANG Qing. The shrinkage rate changes of polyester filament fabric during the dyeing and finishing process[J]. Journal of Xi an University of Engineering Science and Technology, 2006, 20(6): 687-691
Authors:YANG Yan-fei  CUI Shi-zhong  ZHENG Tian-yong  WANG Qing
Abstract:During the dying and finishing process,the polyester fabric is impacted by the interaction of all process condition,and the fabric appearance and structure are changed continuously.To reflect the exact influence of dying and finishing process to the fabric size,the fabric shrinkage rate,each process is studied by the simulated experiment of the dying and finishing for the polyester filament fabric.It is found that each process has different influence to the shrinkage rate.The whole shrinkage rate during the dying and finishing process is increased by the heat setting temperature.The influence factors of fabric shrinkage include the heat,water and alkali,and the effect of heat and water are obvious.
Keywords:polyester filament fabric  dying and finishing process  shrinkage rate  fabric appearance  heat setting temperature
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号