首页 | 本学科首页   官方微博 | 高级检索  
     检索      

抛落式磨机内钢球离心力与转速率的关系
引用本文:陈广振,奚白,赵通林.抛落式磨机内钢球离心力与转速率的关系[J].鞍山科技大学学报,2002,25(2):81-83.
作者姓名:陈广振  奚白  赵通林
作者单位:鞍山钢铁学院化学工程学院 辽宁鞍山114002 (陈广振,奚白),鞍山钢铁学院化学工程学院 辽宁鞍山114002(赵通林)
摘    要:从理论上阐明了抛落式工作磨机内钢球离心力的大小、方向与转速率之间的变化规律 .结果表明 ,钢球离心力随着转速率的增加而逐渐增大到其极大值 (可达全部钢球重力的 34%左右 )后开始减小 ,直至为零 ;该离心力与垂直轴的夹角则随着转速率的增加而逐渐减小至极小值 (约 2 5° - 2 9°)后开始增大 .钢球离心力随转速率的变化规律说明了其是造成转速运转磨机振动加剧的主要因素之一

关 键 词:抛落式靡机  钢球离心力  转速率
文章编号:1000-1654(2002)02-0081-03
修稿时间:2001年12月1日

Relation Between Centrifugal Force of Steel Balls and Speed of a Ball Mill
CHEN Guang_zhen,XI Bai,ZHAO Tong_lin.Relation Between Centrifugal Force of Steel Balls and Speed of a Ball Mill[J].Journal of Anshan University of Science and Technology,2002,25(2):81-83.
Authors:CHEN Guang_zhen  XI Bai  ZHAO Tong_lin
Abstract:The changing rules between centrifugal force of steel balls and speed of grinding mill have been set forth in this paper.The results show that,with the increase of the speed of the ball mill,centrifugal force increases gradually to its maximum value (about 34% of the total weight of all steel balls) and then begins to decrease until zero,and at the same time,the angle between centrifugal force and its vertical axis decreases from about 90 0 to its minimum value (about 25 0) and then begins to increase.A conclusion can be drawn from this that centrifugal force is one of the main factors causing stronger vibration of a mill operated at high speed.
Keywords:mill operated at high speed  centrifugal force of steel balls  rotational speed rate
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号