| 基于RTX脉冲插入式热误差补偿信号研究 |
| |
| 引用本文： | 王永青,陈松.基于RTX脉冲插入式热误差补偿信号研究[J].大连理工大学学报,2012,52(6):835-840. |
| |
| 作者姓名： | 王永青 陈松 |
| |
| 作者单位： | 大连理工大学精密与特种加工教育部重点实验室,辽宁大连,116024 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 热误差的实时补偿最终需要将位移量转化为脉冲信号输入到数控机床的数控系统中才能有效进行.利用RTX的高实时可靠性的特点,在RTX环境下通过通用并口接收数控机床的反馈装置的反馈脉冲,并进行插入操作将热误差补偿脉冲信号叠加到原始的反馈脉冲信号中,运用通用并口端口并行传输脉冲信号的特点,通过通用并口将叠加后的脉冲信号作为反馈脉冲信号输入到数控机床数控系统中进行计算操作,从而达到低成本的数控机床热误差实时补偿的目的.
|
| 关 键 词： | RTX 热误差 数控机床 脉冲插入 并口编程 |
Research on pulse insertion thermal error compensation signal based on RTX |
| |
| WANG Yongqing,CHEN Song.Research on pulse insertion thermal error compensation signal based on RTX[J].Journal of Dalian University of Technology,2012,52(6):835-840. |
| |
| Authors: | WANG Yongqing CHEN Song |
| |
| Institution: | (Key Laboratory for Precision & Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian 116024,China) |
| |
| Abstract: | The displacement should be converted into pulse signal in real-time thermal error compensation, and the pulse signal is inputted into the CNC system. In hard real-time RTX environment, the parallel port receives the feed back pulse signal sending out from the feed back device. By using pulse insertion operation, the thermal error compensation pulse signal is overlapped on the original feed back pulse signal, and then the overlapped pulse signal is inputted into the CNC system via common parallel port because of the parallel transmission characteristics of the parallel port. Therefore, the thermal error compensation is implemented at low cost. |
| |
| Keywords: | RTX thermal error numerical control machine pulse insertion parallel port programming |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《大连理工大学学报》浏览原始摘要信息 |
| 点击此处可从《大连理工大学学报》下载免费的PDF全文 |
|
