| 线圈骨架摩擦焊接头裂纹形成的原因分析 |
| |
| 引用本文： | 史学芳,毛信孚.线圈骨架摩擦焊接头裂纹形成的原因分析[J].西安科技大学学报,2006,26(1):104-107. |
| |
| 作者姓名： | 史学芳 毛信孚 |
| |
| 作者单位： | 1. 西安电子科技大学,技术物理学院,陕西,西安,710071
2. 西北工业大学,材料学院,陕西,西安,710072 |
| |
| 摘 要： | 对线圈骨架DT4A纯铁和1Cr18Ni9Ti不锈钢摩擦焊接头裂纹的形成进行了原因分析。分析认为摩擦焊接参数没有得到优化，轴向压力卸载过早，焊接不起；而且异种材料物理性能线胀系数上有很大差别，导致摩擦焊接界面周边处形成最大张应力以及奥氏体与非奥氏体不锈钢之间的组织应力容易驱使裂纹的形成。
|
| 关 键 词： | 线圈骨架 摩擦焊接 异种材料 |
| 文章编号： | 1672-9315(2006)01-0104-04 |
| 修稿时间： | 2005年12月10 |
Analysis gauses for crack formation on friction welding joint for ring skeleton |
| |
| SHI Xue-fang,MAO Xin-fu.Analysis gauses for crack formation on friction welding joint for ring skeleton[J].JOurnal of XI’an University of Science and Technology,2006,26(1):104-107. |
| |
| Authors: | SHI Xue-fang MAO Xin-fu |
| |
| Abstract: | Causes analysis of crack formation on the friction welding joint for ring 5Ke-leton DT4A and 1Cr18Ni9Ti were analyzed.It was regarded that friction welding parameters were not optimized,so that axial pressure was unloaded ahead and friction welding boundary surface couldn't be welded enough and that coefficients of linear expansion among physicochemical properties between incompatible materials are very different,to result in the highest tensile stresses formation in circumference of the structural stresses between stainless steel of austenite and nonaustenite,so that cracks were easily formed. |
| |
| Keywords: | ring skeleton friction welding incompatible materials |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
