首页 | 本学科首页   官方微博 | 高级检索  
     检索      

扫描电镜电子通道衬度技术研究铜双晶体循环饱和位错组态
引用本文:张哲峰,王中光,苏会和.扫描电镜电子通道衬度技术研究铜双晶体循环饱和位错组态[J].应用基础与工程科学学报,1998(3).
作者姓名:张哲峰  王中光  苏会和
作者单位:中国科学院金属研究所材料疲劳与断裂国家重点实验室
摘    要:通过对垂直晶界[5913]⊥[579]铜双晶体进行循环变形,借助于扫描电镜电子通道衬度技术研究了组元晶体及晶界附近的循环饱和位错组态,结果表明两个组元晶体的表面滑移程度不同,两个组元晶体中的循环饱和位错组态也明显不同,驻留滑移带只能在组元晶体G1中形成,驻留滑移带能够到达晶界但不能穿过晶界.讨论了组元晶体取向对双晶体的表面滑移形貌及饱和位错组态的影响以及驻留滑移带与晶界的交互作用.

关 键 词:铜双晶体  扫描电镜电子通道衬度技术  位错组态

Cyclic Saturation Dislocation Pattern Observation in a Copper Bicrystal by SEM ECC Technique
ZHANG Zhefeng,WANG Zhongguang,SU Huihe.Cyclic Saturation Dislocation Pattern Observation in a Copper Bicrystal by SEM ECC Technique[J].Journal of Basic Science and Engineering,1998(3).
Authors:ZHANG Zhefeng  WANG Zhongguang  SU Huihe
Abstract:The cyclic saturation dislocation patterns within grains and near grain boundary (GB) were investigated in a copper bicrystal with a perpendicular by SEM ECC technique. It was found that slip morphology and saturation dislocation patterns within the component crystal G1 and G2 are obviously different. Persistent slip bands (PSBs) can only form in the grain G1 with a relatively higher Schmid factor. The PSBs can reach the GB, but cannot transfer through the GB continuously and the ends of those PSBs were affected in the vicinity of the GB. In the end, the effect of component crystal orientations on the surface slip and saturation dislocation patterns and the interactions of PSBs with GB were discussed.
Keywords:copper bicrystal  SEM  ECC technique  dislocation patterns
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号