| 共混工艺对SMA增容ABS/PA6共混体系力学性能的影响 |
| |
| 引用本文： | 何敏,郭建兵,雷金峰,鲁圣军,于杰.共混工艺对SMA增容ABS/PA6共混体系力学性能的影响[J].贵州工业大学学报(自然科学版),2007,36(3):5-8. |
| |
| 作者姓名： | 何敏 郭建兵 雷金峰 鲁圣军 于杰 |
| |
| 作者单位： | 1. 贵州大学材料科学与冶金工程学院,贵州贵阳550003;国家复合改性聚合物材料工程技术研究中心,贵州贵阳550025
2. 国家复合改性聚合物材料工程技术研究中心,贵州贵阳550025 |
| |
| 基金项目： | 贵州省科技计划项目(批准号GY-2005-3036) |
| |
| 摘 要： | 以苯乙烯-马来酸酐共聚物(SMA)为增容剂,研究了共混工艺对ABS/PA6共混物力学性能的影响。结果表明:力学性能最好的是通过ABS和SMA挤出,再与PA6挤出,注塑得到的ABS/PA6共混物;其次PA6/SMA挤出,再与ABS挤出,注塑得到的ABS/PA6共混物;力学性能最差的是PA6/SMA/ABS一起挤出,注塑得到的ABS/PA6共混物。
|
| 关 键 词： | 共混工艺 增容 PA6 ABS |
| 文章编号： | 1009-0193（2007）03-0005-04 |
| 修稿时间： | 2006-09-26 |
The Effect of Blending Technologies on Mechanical Properties of ABS/PA6 Blends with SMA as Compatibilizer |
| |
| HE Min,GUO Jian-bing,LEI Jin-feng,LU Sheng-jun,YU Jie.The Effect of Blending Technologies on Mechanical Properties of ABS/PA6 Blends with SMA as Compatibilizer[J].Journal of Guizhou University of Technology(Natural Science Edition),2007,36(3):5-8. |
| |
| Authors: | HE Min GUO Jian-bing LEI Jin-feng LU Sheng-jun YU Jie |
| |
| Institution: | 1. College of Materials Science and Metallurgy Engineering, Guizhou University, Guiyang 550003, China; 2. National Engineering Research Center for Compounding and Modification of Polymeric Materials, Guiyang 550025,China |
| |
| Abstract: | The effect of blending technologies on mechanical properties of ABS/PA6 blends with styrene-melaic anhydride copolymer(SMA) as compatibilizer was studied in this paper.The result indicated that the ABS/PA6 blends prepared by ejecting ABS and SMA at first,then ejecting with PA6 obtain the optimum mechanical properties.The ABS/PA6 blends prepared by ejecting PA6 and SMA at first,then ejecting with SMA obtain the second mechanical properties.The ABS/PA6 blends prepared by ejecting ABS,PA6 and SMA at the same time obtain the poorest mechanical properties. |
| |
| Keywords: | blending technology Acrylonitrile-Butadiene-Styrene copolymer Polyamide 6 ABS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
