| 碳钢电子束表面合金化的组织与性能 |
| |
| 引用本文： | 常玉玺,姚大立,等.碳钢电子束表面合金化的组织与性能[J].吉林工学院学报,1990,11(4):72-78. |
| |
| 作者姓名： | 常玉玺 姚大立 |
| |
| 作者单位： | [1]吉林工学院 [2]吉林省机电设计研究院 |
| |
| 摘 要： | 本文用高能电子束对碳钢表面进行了不同粉末、不同预置方法的合金化处理，在组织性能分析基础上，得出了小型轧辊表面合金化的合适工艺，试验结果已用于生产。
|
| 关 键 词： | 电子束 表面合金化 预涂数 胞状树枝晶 稀释区 碳钢 表面强化 |
Structure and Property Analysis of Electron Beam Alloy-Cladded Plain Carbon Steel |
| |
| Chang Y''''uxi Yao Dali Tan Yunsheng
Jilin Institute of Technology Electric & Mechanical Design & Research
Institute,Jilin Province.Structure and Property Analysis of Electron Beam Alloy-Cladded Plain Carbon Steel[J].Journal of Jilin Institute of Technology,1990,11(4):72-78. |
| |
| Authors: | Chang Y'uxi Yao Dali Tan Yunsheng
Jilin Institute of Technology Electric & Mechanical Design & Research
Institute Jilin Province |
| |
| Abstract: | The surface of plain carbon steel specimens were alloy-cladded by means of high energy electron beam. Different alloy powders and different pre-cladding methods were used. Structure and properties of the specimens were studied, and on the basis of these results, optimum surface alloying processing parameters for a small roll were obtained. The results have already been practically used. |
| |
| Keywords: | electron beam surface alloying pre-cladding cellular dendritic crystals diluted zone |
| 本文献已被 CNKI 维普 等数据库收录！ |
