Fault Current Limitation with Superconducting YBCO Thin Films

The behavior of YBCO/metal bilayers under transport currents was explored in the framework of fault current limitation (FCL). Properties of the superconducting-normal transition were first studied phenomenologically during sweep current experiments. For current rates higher than 500A/s, the transition into the normal state was based on non-thermal phenomena and was characterized by a flux creep regime ended by a jump into the normal state. At lower sweep rates, a total diversion of the current in the metallic shunt was observed for temperatures higher than 85 K. In this regime, a partial recovery of the superconducting state took place due to a finite thermal resistance between the superconducting and the metallic films. These two properties of partial diversion into the shunt and of fast switching for a quick rise of the current during a default were exploited for current limitation at 77 K. FCL experiments at 50 Hz show that YBCO/Au bilayers limit the current in about 1 ms at a value of 2.5/c by developing electrical fields as high as 3 kV/m. Moreover, a recovery of the zero resistance state could occur under rated mode. A straightforward application of this property would be the transformer connection. Finally, results on DC current limitation and recovery under nominal mode were presented for the first time.

Fault Current Limitation with Superconducting YBCO Thin Films

The behavior of YBCO/metal bilayers under transport currents was explored in the framework of fault current limitation (FCL). Properties of the superconducting-normal transition were first studied phenomenologically during sweep current experiments. For current rates higher than 500 A/s, the transition into the normal state was based on non-thermal phenomena and was characterized by a flux creep regime ended by a jump into the normal state. At lower sweep rates, a total diversion of the current in the metallic shunt was observed for temperatures higher than 85K. In this regime, a partial recovery of the superconducting state took place due to a finite thermal resistance between the superconducting and the metallic films. These two properties of partial diversion into the shunt and of fast switching for a quick rise of the current during a default were exploited for current limitation at 77 K. FCL experiments at 50 Hz show that YBCO/Au bilayers limit the current in about 1ms at a value of 2. 5/c by developing electrical fields as high as 3kV/m. Moreover, a recovery of the zero resistance state could occur under rated mode. A straightforward application of this property would be the transformer connection. Finally, results on DC current limitation and recovery under nominal mode were presented for the first time.