| 超高强度钢靶板中绝热剪切带的有益作用 |
| |
| 引用本文： | 尹志新,马常祥,李守新,刘燕林.超高强度钢靶板中绝热剪切带的有益作用[J].东北大学学报(自然科学版),2002,23(10):956-959. |
| |
| 作者姓名： | 尹志新 马常祥 李守新 刘燕林 |
| |
| 作者单位： | 东北大学理学院;东北大学理学院;中国科学院金属研究所沈阳材料科学国家(联合)实验室;五二研究所辽宁沈阳110004;中国科学院金属研究所沈阳材料科学国家(联合)实验室;辽宁沈阳110016;辽宁沈阳110004;辽宁沈阳110016;内蒙古包头014000 |
| |
| 基金项目： | 国家九·五重点科技攻关项目( 95 TJ 14 )，国家重点基础研究发展规划项目(G19980 6 15) |
| |
| 摘 要： | 研究了超高强度钢靶板在弹丸穿甲过程中绝热剪切带的特性与分布·结果表明:剪切带的出现,可以协调超高强度钢靶板弹孔附近材料在受冲击时的变形,避免材料在变形过程中因不协调而过早发生脆性开裂·绝热剪切带硬度很高,因此可以承受较高的断裂应力·由于剪切破坏往往吸收较多的弹丸冲击能量,因而可大大削弱弹丸进一步穿甲的能力·超高强度钢中绝热剪切带的出现对减弱弹丸在冲击过程中所造成的破坏并非一无是处·
|
| 关 键 词： | 超高强度钢 绝热剪切带 穿甲 弹丸 |
| 文章编号： | 1005-3026(2002)10-0956-04 |
| 修稿时间： | 2002年3月5日 |
Effect of Adiabatic Shear Bands in the Ultra-High Strength Steel Target on Penetration Resistance |
| |
| YIN Zhi xin ,Ma Chang xiang ,LI Shou xin ,LIU Yan lin.Effect of Adiabatic Shear Bands in the Ultra-High Strength Steel Target on Penetration Resistance[J].Journal of Northeastern University(Natural Science),2002,23(10):956-959. |
| |
| Authors: | YIN Zhi xin Ma Chang xiang LI Shou xin LIU Yan lin |
| |
| Abstract: | The characteristic and distribution of the adiabatic shear bands in a ultra high strength steel target penetrated by bullet were studied. It is shown that the adiabatic shear bands can coordinate the deformation nearby the perforation which results in occuring brittle breaking apart early. The hardness of adiabatic shear bands is very high, so it can bear very high fracture stress. Due to consume more energy of bullet, the shear fracture can decrease the ability of bullet further penetration in. So,it can be concluded that the adiabatic shear bands in ultra high strength steel target are not so detrimental as one expected. |
| |
| Keywords: | Ultra high strength steel adiabatic shear bands penetration bullet |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《东北大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《东北大学学报(自然科学版)》下载免费的PDF全文 |
