首页 | 本学科首页   官方微博 | 高级检索  
     检索      

毛丛直径形态特征与毛丛强度之间关系的探讨
引用本文:赵小峰,李伟.毛丛直径形态特征与毛丛强度之间关系的探讨[J].西安工程科技学院学报,2005,19(3):265-269.
作者姓名:赵小峰  李伟
作者单位:[1]西安工程科技学院,招生就业处,陕西西安710048 [2]东华大学,纺织学院,上海200051
摘    要:分析国毛毛丛强度与纤维直径形态特征之间的关系,并采用多元回归分析建立了毛丛强度和原毛特征参数之间的模型.测试结果表明,国毛毛丛纤维直径最细处位于毛丛根部附近,且毛丛断裂位置也几乎发生在根部.试验结果表明,毛丛强度94.5%(R2)的变化可由毛丛最细处的纤维平均直径、最细处距毛尖的位置和原毛总体平均细度来解释.

关 键 词:国毛毛丛  毛丛强度  毛丛直径  相关关系
文章编号:1671-850X(2005)03-0265-05
修稿时间:2004年10月13

The relationship between fibre diameter profile characteristics and staple strength
ZHAO Xiao-feng,LI Wei.The relationship between fibre diameter profile characteristics and staple strength[J].Journal of Xi an University of Engineering Science and Technology,2005,19(3):265-269.
Authors:ZHAO Xiao-feng  LI Wei
Institution:ZHAO Xiao-feng~1,LI Wei~2,
Abstract:The correlation between fibre diameter profiles(FDP) and Staple Strength(SS) on domestic greasy wool is analyzed and discussed.The multiple regression analysis method is used to establish one simple model for the Staple Strength based on the measurements of characteristics of raw wool.Testing results show that the minimum fibre diameter(D_(min)) along staple was located near the staple base,while the percentage of the position of breaking of staple is mostly occurred near the base.And this trial presented the result that 94.5% of the variation in Staple Strength is explained by D_(min),l_(min) and MFD.
Keywords:domestic greasy staple  staple strength  fibre diameter profile  correlation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号