| 涤纶织物氯化亚锡拔染印花工艺的研究 |
| |
| 引用本文： | 陈启宏,米清华,刘建平.涤纶织物氯化亚锡拔染印花工艺的研究[J].武汉科技学院学报,1996(1). |
| |
| 作者姓名： | 陈启宏 米清华 刘建平 |
| |
| 作者单位： | 武汉纺织工学院 |
| |
| 基金项目： | 省科委重点攻关科技项目 |
| |
| 摘 要： | 研究了新拔染助剂ＷＴ－ＤＡ在涤纶织物氯化亚锡拔染印花上的应用工艺，确定了氯化亚锡和各种助剂的最佳用量范围，优化了汽蒸工艺条件．并筛选了部分底色分散染料和着色分散染料。研究结果表明，涤纶织物氯化亚锡拔染印花是可行的，拔染白度，着色鲜艳度及花型精细度均可达到要求。
|
| 关 键 词： | 涤纶织物，氯化亚锡，拔染印花 |
Study on Discharge Printing of Polyester With Stannous Chloride |
| |
| Chen Qihong, Mi Qinghua ,Liu Jianping.Study on Discharge Printing of Polyester With Stannous Chloride[J].Journal of Wuhan Institute of Science and Technology,1996(1). |
| |
| Authors: | Chen Qihong Mi Qinghua Liu Jianping |
| |
| Institution: | Chen Qihong; Mi Qinghua ;Liu Jianping |
| |
| Abstract: | The application of the new discharge agent WT-DA in the discharge printing ofpolyester with stannous chloride was studied. The best processes were obtained by selecting the quantity of stannous chloride and agents,and the steaming condition. The ground dyes and the colour dyes were also choosen. |
| |
| Keywords: | polyester fabric stannous chloride discharge printing |
| 本文献已被 CNKI 等数据库收录！ |
