首页 | 本学科首页   官方微博 | 高级检索  
     检索      

非金属矿物聚合材料的制备及性能研究
引用本文:井强山,王进双,杨润桦.非金属矿物聚合材料的制备及性能研究[J].信阳师范学院学报(自然科学版),2014(3):371-374,378.
作者姓名:井强山  王进双  杨润桦
作者单位:信阳师范学院非金属材料研究所,河南信阳,464000
基金项目:河南省重点科技攻关项目
摘    要:以偏高岭土、粉煤灰为主要原料,沸石、黏土为辅料,生石灰和钠水玻璃为碱激发剂制备矿物聚合材料.通过正交试验研究了养护温度、养护时间、蒸养时间对抗压强度影响,通过单因素实验研究了生石灰用量、水固比及水玻璃模数对抗压强度影响;并通过红外光谱、X-射线衍射和扫描电镜分析了样品的化学键变化、物相组成及微观形貌.结果表明,最佳的养护条件为养护温度80℃、湿度95%,养护时间72 h,0.8 MPa蒸养8h;生石灰用量、水固比、水玻璃模数的最佳值分别为3%(wt)、0.37、2.3,样品的最大抗压强度为60.8 MPa.

关 键 词:矿物聚合材料  生石灰  偏高岭土  粉煤灰  水固比  钠水玻璃

Preparation and Properties of Non-metallic Geopolymer
Jing Qiangshan,Wang Jinshuang,Yang Runhua.Preparation and Properties of Non-metallic Geopolymer[J].Journal of Xinyang Teachers College(Natural Science Edition),2014(3):371-374,378.
Authors:Jing Qiangshan  Wang Jinshuang  Yang Runhua
Institution:Jing Qiangshan;Wang Jinshuang;Yang Runhua;Institute of Non-metallic Materials,Xinyang Normal University;
Abstract:Geopolymer was prepared with fly ash and metakaolin as the main raw materials,natural zeolite and clay as the auxiliary materials,activated with sodium silicate and quicklime. Influence of curing temperature,curing time and autoclave curing time on compression strength were investigated by orthogonal experiments. Effects of quicklime amount,water-solid ratio and sodium silicate modulus on compression strength were also studied by single factor experiment. Chemical bounding,phase composition and microstructure of geopolymer were characterized by FT-IR,XRD and SEM techniques. Results show that the optimized conditions are curing temperature of 80 ℃,humidity of95%,curing time of 72 h,autoclaved curing at 0. 8 Mpa for 8 h. Quicklime dosage,water solid ratio and the modulus of sodium silicate is 3%( wt),0. 37 and 2. 3,respectively. The compression strength of the optimal sample is 60. 8MPa.
Keywords:geopolymer  quicklime  metakaolin  fly ash  water-solid ratio  sodium silicate liquid
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号