| RH冶炼超低碳钢的最优工艺研究 |
| |
| 引用本文： | 岳峰,崔衡,李朋欢,包燕平.RH冶炼超低碳钢的最优工艺研究[J].北京科技大学学报,2009(Z1). |
| |
| 作者姓名： | 岳峰 崔衡 李朋欢 包燕平 |
| |
| 作者单位： | 北京科技大学冶金工程研究院; |
| |
| 摘 要： | 建立了RH碳氧反应模型,计算值和实际测量值吻合较好,可以模拟实际RH精炼过程中的碳氧反应.在一定的初始碳含量范围内,初始碳含量对RH脱碳结束的碳含量基本没有影响,同时,RH脱碳反应达到14min后其脱碳速度小于1.5×10-6min-1,脱碳反应接近平衡.随着钢包渣TFe含量的增高,RH脱碳反应降低的氧含量和碳含量的比值在降低.当钢包渣TFe含量为8%时,实际计算的碳氧线和理论的碳氧线接近.
|
| 关 键 词： | RH 超低碳钢 碳氧反应 |
Study on the optimum process of refining ULC steel by RH degasser |
| |
| YUE Feng,CUI Heng,LI Peng-huan,BAO Yan-pingResearch Institute of Metallurgical Engineering,University of Science , Technology Beijing,Beijing ,China.Study on the optimum process of refining ULC steel by RH degasser[J].Journal of University of Science and Technology Beijing,2009(Z1). |
| |
| Authors: | YUE Feng CUI Heng LI Peng-huan BAO Yan-pingResearch Institute of Metallurgical Engineering University of Science Technology Beijing Beijing China |
| |
| Institution: | YUE Feng,CUI Heng,LI Peng-huan,BAO Yan-pingResearch Institute of Metallurgical Engineering,University of Science , Technology Beijing,Beijing 100083,China |
| |
| Abstract: | |
| |
| Keywords: | RH ULC steel carbon-oxygen reaction |
| 本文献已被 CNKI 等数据库收录！ |
|
