首页 | 本学科首页   官方微博 | 高级检索  
     检索      

粗网节块内功率的重构
引用本文:胡永明,甘东,罗经宇.粗网节块内功率的重构[J].清华大学学报(自然科学版),1995(3).
作者姓名:胡永明  甘东  罗经宇
作者单位:清华大学核能技术设计研究院,清华大学现代应用物理系
基金项目:国家“八五”科技攻关项目
摘    要:粗网节块程序如NGFM、SIMULATE等只能给出平均功率。而反应堆设计中更关心的是堆芯内燃料元件的功率分布。本文讨论了获得堆内元件功率分布的重构方法。双二次多项式用于快群中子通量展开,与双曲函数项结合的双二次多项式用于热群中子通量密度展开。研究了21项和13项展开法,并与CITATION细网格计算进行比较。结果表明,本文中研制的21项方法程序RECON比SIMULATE-3NEMO程序中所用的13项方法精确得多,在外围区域更明显。

关 键 词:功率重构,节块程序,多项式展开,不连续因子

Pin power reconstrucion methodology ofnodal coarse mesh calculations
Hu Yongming, Gan Dong,Luo Jingyu.Pin power reconstrucion methodology ofnodal coarse mesh calculations[J].Journal of Tsinghua University(Science and Technology),1995(3).
Authors:Hu Yongming  Gan Dong  Luo Jingyu
Abstract:he nodal codes such as NGFM and SIMULATE can only give the nodal averagepower distributions of a reactor core. But the pin power distribution of the reactor core ismore interesting for the nuclear reactor design. The reconstrucion methods to obtain the finepin power distribution in a reactor core are discussed in this paper. A bi-quartic polynomial isused for the fast-group flux expansion and a bi-quartic polynomial combined with hyperbolicterms is used for the thermal flux.The investigated expansions with 21-term and with 13term are compared with the results from CITATION fine mesh calculations. It is found thatthe 21-term code RECON is more accurate than the 13--term one,which is used inSIMULATE-3 and NEMO codes, especially in the peripheral regions.
Keywords:pin power reconstrucionl nodal codel polynomial expansion  discontinuousfactor  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号