非接触电能传输系统双模控制式交直交变换器

针对传统非接触电能传输系统中初级回路主电路的不足,提出了一种可工作于Buck和Boost2种控制模式的新型交直交变换器,该变换器不仅有效地解决了传统非接触电能传输系统中大容量滤波电容和DC/DC调压环节所引起的电流冲击、成本高、控制复杂等问题,而且通过2种模式的切换和其对应的开关管占空比的调节可实现输入电压大范围波动时的谐振电流恒幅控制。分析了该变换器的拓扑结构和工作原理,阐述了变换器在2种模式下的切换控制策略,并给出了仿真验证结果。

Dual mode AC DC AC converter for contactless power transfer system

A new type AC DC AC converter which can work in Buck or Boost mode is proposed in order to overcome the deficiencies of the primary circuit of the traditional contactless power transfer system. Through switching this two modes and turning the duty cycles of the switches, not only the resonant current amplitude of the primary resonant current can be controlled to be constant against a wide range variation of input voltage, but also the problems, such as surge current, high cost, complex control etc., caused by the DC filter and DC/DC converter in a traditional CPT system are effectively eliminated. The topology and operation principle of the proposed converter have been analyzed. The corresponding control strategy has been presented and verified by simulation results.