首页 | 本学科首页   官方微博 | 高级检索  
     

稠油热采井改性纤维复合防砂实验研究
引用本文:薄启炜 齐 宁周福建,陈新民顾海红. 稠油热采井改性纤维复合防砂实验研究[J]. 西南石油大学学报(自然科学版), 2010, 32(3): 132-136. DOI: 10.3863/j.issn.1674-5086.2010.03.025
作者姓名:薄启炜 齐 宁周福建  陈新民顾海红
作者单位:1.中国石化油田勘探开发事业部,北京 朝阳 100728; 2.中国石油大学(华东)石油工程学院,山东 东营 257061;3.中国石油勘探开发研究院,北京 海淀 100083; 4.中国石化胜利油田分公司滨南采油厂,山东 滨州 257600
摘    要:单一的防砂技术在稠油热采井中的应用受到一定限制,为解决热采井防细粉砂,从改善纤维复合防砂技术体系中的基体(树脂涂敷砂)性能入手,以期使纤维复合防砂技术能够用于热采井防砂。通过考察水溶性酚醛树脂、ER树脂粉末、偶联剂、增强剂加量对砂体抗压强度和渗透率的影响,分析了体系中各组分的作用机理。通过室内实验优化了纤维防砂体的配方,研究表明,偶联剂、改性剂、增强剂、ER树脂粉末、水溶性酚醛树脂SR1、石英砂之间的质量比为(0.15~0.20)∶3.1∶1.5∶(2~4)∶10∶100时体系具有较高的防砂强度,并且在350℃下仍能保持在3MPa左右,较不加入纤维时高30%,渗透率可增加10%左右。

关 键 词:纤维  防砂  稠油热采井  树脂涂敷砂  出砂  

EXPERIMENTAL STUDY ON MODIFIED FIBER-RESIN COATED SAND CONTROL IN THE THERMAL RECOVERY HEAVY OIL WELLS
BO Qi-wei QI Ning ZHOU Fu-jian CHEN Xin-min GU Hai-hong. EXPERIMENTAL STUDY ON MODIFIED FIBER-RESIN COATED SAND CONTROL IN THE THERMAL RECOVERY HEAVY OIL WELLS[J]. Journal of Southwest Petroleum University(Seience & Technology Edition), 2010, 32(3): 132-136. DOI: 10.3863/j.issn.1674-5086.2010.03.025
Authors:BO Qi-wei QI Ning ZHOU Fu-jian CHEN Xin-min GU Hai-hong
Affiliation:1.The Exploration & Production Department,SINOPEC,Chaoyang Beijing 100728,China;2.School of Petroleum Engineering,China University of Petroleum (East China),Dongying Shandong 257061,China;3.Research Institute of Petroleum Exploration and Development,CNPC,Haidian Beijing 100083,China;4.Binnan Oil Production Plant of Shengli Oilfield Co.Ltd.,SINOPEC,Binzhou Shandong 257600,China
Abstract:Single sand control technique has its limitations when applied to the thermal recovery heavy oil wells.Property of resin coated sand in fiber-complex sand control technique system is improved in order to apply fiber-complex sand control technique to the thermal recovery wells to prevent fine-silty sand production.Compressive strength and permeability are taken as indicators,effect of concentration of water soluble phenol-formaldehyde resin,ER resin powder,coupling agent and strengthening agent on strength of resin coated sand are researched,and function mechanism of components among the systems is analyzed.Mass ratio among coupling agent,modifier,strengthening agent,ER resin powder,water soluble phenol-formaldehyde resin SR-1 and quartz sand of typical fiber-complex formulation in the thermal recovery heavy oil wells is (0.15~0.20)∶3.1∶1.5∶(2~4)∶10∶100.The result of experiment indicates that strength of fiber-complex at 350℃ still remains about 3MPa,which is 30% higher than strength of resin coated sand without fiber,and permeability of resin coated sand is improved about 10% after fiber added.
Keywords:fiber  sand control  the thermal recovery heavy oil well  resin coated sand  sand production  
本文献已被 CNKI 等数据库收录!
点击此处可从《西南石油大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《西南石油大学学报(自然科学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号