|
|||||
|
|
| 蜗杆砂轮磨削斜齿轮时的构型原理及误差特征 | |
| 引用本文： | 李文龙,胡红英,邵强,刘健.蜗杆砂轮磨削斜齿轮时的构型原理及误差特征[J].大连民族学院学报,2014,16(5):517-519. |
| 作者姓名： | 李文龙 胡红英 邵强 刘健 |
| 作者单位： | 1 大连民族学院 机电信息工程学院,辽宁 大连 116605; 2 大连理工大学 机械工程学院,辽宁 大连 116024 |
| 摘 要： | 渐开线螺旋面是工程上广泛应用的廓面之一,其上存在四族特征线:渐开线、螺旋线、直母线及接触迹。基于渐开线螺旋面上的特征线族,研究了蜗杆砂轮磨齿机磨削渐开线斜齿轮廓面的构型原理,并进行了误差特征分析。 |
| 关 键 词： | 特征线族 渐开线螺旋面 构型原理 蜗杆砂轮磨齿机 |
Shaping Principle and Error Characteristics of Helical Gear Tooth Surfaces Grinded with a Worm Wheel Grinding Machine Tool |
|
| LI Wen-long,HU Hong-ying,SHAO Qiang,LIU Jian.Shaping Principle and Error Characteristics of Helical Gear Tooth Surfaces Grinded with a Worm Wheel Grinding Machine Tool[J].Journal of Dalian Nationalities University,2014,16(5):517-519. | |
| Authors: | LI Wen-long HU Hong-ying SHAO Qiang LIU Jian |
| Institution: | 1.College of Electromechanical and Information Engineering, Dalian Nationalities University, Dalian Liaoning 116605, China; 2.School of Mechanical Engineering, Dalian University of Technology, Dalian Liaoning 116024, China |
| Abstract: | An involute helical surface is one of the widely used surfaces in engineering. There are four groups of characteristic lines (i.e., involute, helix, straight generatrix and contact trace) on involute helical surfaces. In the basis of characteristic line groups, the shaping principle of helical involute surfaces grinded with a worm wheel grinding machine tool is studied. And error characteristics are analyzed. |
| Keywords: | characteristic line groups involute helical surface shaping principle worm wheel grinding machine |
| 本文献已被 CNKI 等数据库收录！ | |
| 点击此处可从《大连民族学院学报》浏览原始摘要信息 | |
| 点击此处可从《大连民族学院学报》下载免费的PDF全文 | |