首页 | 本学科首页   官方微博 | 高级检索  
     检索      

葡萄糖的添加对富锂锰基正极材料Li1.2Ni0.2Mn0.6O2的影响
引用本文:王雷,向延鸿,廖启军,田林,吴贤文,吴显明,熊利芝,何则强.葡萄糖的添加对富锂锰基正极材料Li1.2Ni0.2Mn0.6O2的影响[J].吉首大学学报(自然科学版),2019,40(3):47-52.
作者姓名:王雷  向延鸿  廖启军  田林  吴贤文  吴显明  熊利芝  何则强
作者单位:(1.吉首大学 物理与机电工程学院,湖南 吉首 416000;2.锰锌钒产业技术湖南省2011协同中心,湖南 吉首 416000;3.吉首大学 化学化工学院,湖南 吉首 416000;4.吉首大学 生物资源与环境科学学院 湖南 吉首 416000)
基金项目:国家自然科学基金资助项目( 51662010,51364009,51262008,51472107 和 51672104);湖南省教育厅优秀青年项目(16B209和15B190);湘西自治州基础理论研究项目(2018SF5016)吉首大学大学生研究性学习与创新实验计划;吉首大学校级理工科研究项目(JDX17040,JDX16008,JDX16009)
摘    要:采用溶胶凝胶法制备合成富锂锰基正极材料Li1.2Ni0.2Mn0.6O2,在前期配制金属离子溶液时,通过添加不同量的葡萄糖(葡萄糖添加量分别为试剂总质量的0,6%,12%,36%,48%)来分析其对Li1.2Ni0.2Mn0.6O2的结构、形貌、电化学性能以及倍率性能的影响.恒流充放电测试结果显示,少量葡萄糖(6%,12%)加入,可以明显提高材料首次放电比容量.0.05C首次放电比容量由未加入葡萄糖材料的174 mAh/g提升至添加12%葡萄糖材料的265.9 mAh/g.倍率性能测试结果显示,葡萄糖的加入可以明显提高材料倍率性能.其中葡萄糖添加量为48%的材料倍率性能最好,首次放电比容量达到141 mAh/g,经过0.05C,0.1C,0.2C,0.5C,1C循环测试后再进行0.1C循环测试30次,放电比容量为110 mAh/g,容量保持率为78%.

关 键 词:Li1.2Ni0.2Mn0.6O2  葡萄糖  电化学性能  倍率性能  

Effect of Glucose on Li_(1.2)Ni_(0.2)Mn_(0.6)O_2 Lithium-Rich Manganese Cathode Materials
WANG Lei,XIANG Yanhong,LIAO Qijun,TIAN Lin,WU Xianwen,WU Xianming,XIONG Lizhi,HE Zeqiang.Effect of Glucose on Li_(1.2)Ni_(0.2)Mn_(0.6)O_2 Lithium-Rich Manganese Cathode Materials[J].Journal of Jishou University(Natural Science Edition),2019,40(3):47-52.
Authors:WANG Lei  XIANG Yanhong  LIAO Qijun  TIAN Lin  WU Xianwen  WU Xianming  XIONG Lizhi  HE Zeqiang
Institution:(1.School of Physics and Mechanical Engineering,Jishou University,Jishou 416000,Hunan China;2.Hunan 2011 Collaborative Center of Manganese,Zinc and Vanadium Industry Technology,Jishou 416000,Hunan China;3.School of Chemistry and Chemical Engineering,Jishou University,Jishou 416000,Hunan China;4. School of Biological Resources and Environmental Sciences,Jishou University,Jishou 416000,Hunan China)
Abstract:The lithium-rich manganese cathode materialLi1.2Ni0.2Mn0.6O2was prepared by sol-gel method.In the early stage of metalion solution preparation,the structure,morphology and electrochemistry ofLi1.2Ni0.2Mn0.6O2were analyzed with addition of x=0,6%,12%,36%,48% glucose(x=glucose quality/metal reagent quality).Addition can significantly increase the material's initial discharge specific capacity.The initial discharge specific capacity of 0.05C increased from 174 mAh/g without added glucose material to 265.9 mAh/g with added glucose x=12%.The rate performance test results show that the addition of glucose can significantly improve the material rate performance.The material with added glucose x=48% has the best rate performance.The initial discharge specific capacity reached 141 mAh/g.After the cycle test of 0.05C,0.1C,0.2C,0.5C,and 1C,the recycling test was performed 30 times for 0.1C,the specific discharge capacity was 110 mAh/g,and the capacity retention rate was 78%.
Keywords:1  2Ni0  2Mn0  Li1" target="_blank">6O2')">Li1  2Ni0  2Mn0  6O2                                                                                                                        glucose                                                                                                                        electrochemical performance                                                                                                                        magnification
本文献已被 CNKI 等数据库收录!
点击此处可从《吉首大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《吉首大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号