首页 | 本学科首页   官方微博 | 高级检索  
     检索      

适用于低电源电压的快速预充Flash灵敏放大器
引用本文:黄鹏,王源,杜刚,张钢刚,康晋锋.适用于低电源电压的快速预充Flash灵敏放大器[J].北京大学学报(自然科学版),2014,50(4):600-604.
作者姓名:黄鹏  王源  杜刚  张钢刚  康晋锋
作者单位:北京大学微电子学研究院, 教育部微电子器件与电路重点实验室, 北京 100871;
基金项目:国家重点基础研究发展计划(2010CB934203)资助
摘    要:提出一种新型快速预充Flash灵敏放大器, 能够实现在低电源电压下的快速工作。采用反相器反馈控制的预充电路模块, 使得预充速度得以提升。还提出新型快速预充Flash灵敏放大器的改进型, 进一步使用反相器构成参考电压发生电路, 取消电流源模块, 从而降低功耗。新型电路在速度和功耗上有较大改善, 65 nm CMOS工艺条件下仿真结果表明, 相比传统结构,新结构预充速度提高15%, 功耗降低14%。

关 键 词:快闪存储器  灵敏放大器  低压  预充  
收稿时间:2013-04-06

Fast Pre-charge Sense Amplifier for Low-Voltage Flash Memory
HUANG Peng;WANG Yuan;DU Gang;ZHANG Ganggang;KANG Jinfeng.Fast Pre-charge Sense Amplifier for Low-Voltage Flash Memory[J].Acta Scientiarum Naturalium Universitatis Pekinensis,2014,50(4):600-604.
Authors:HUANG Peng;WANG Yuan;DU Gang;ZHANG Ganggang;KANG Jinfeng
Institution:Key Laboratory of Microelectronic Devices and Circuits MOE, Institute of Microelectronics, Peking University, Beijing 100871;
Abstract:A new flash sense amplifier (SA) is presented, which has a fast pre-charge speed, low power and low supply voltage. Compared to the conventional low-voltage SA, the novel amplifier uses two inverters to improve pre-charge speed by feedback-control pre-charge circuit and to reduce power consumption by taking place of the current source module in reference voltage generation circuit, respectively. In 65 nm CMOS process, the pre-charge time of novel circuit is improved above 15%, and the power dissipation is lowered about 14%.
Keywords:flash memory  sense amplifier  low-voltage  pre-charge  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《北京大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《北京大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号