| 注塑模温度场的试验研究 |
| |
| 引用本文： | 骆志高,陈嘉真,李崇豪.注塑模温度场的试验研究[J].江苏大学学报(自然科学版),1993(4). |
| |
| 作者姓名： | 骆志高 陈嘉真 李崇豪 |
| |
| 作者单位： | 江苏工学院汽车工程系
(骆志高，陈嘉真)，江苏工学院汽车工程系(李崇豪) |
| |
| 摘 要： | 讨论了二维非稳态模具温度场的数学模型。采用实测分析的方法对模具温度场进行了研究。在改变冷却水孔的直径大小及冷却水流速两种工况下,通过微机系统的采集和处理,画出注塑周期中模具型腔二维等温线和三维温度场的图形,为设计注塑模冷却系统提供了依据。
|
| 关 键 词： | 注塑 温度场 冷却系统 流动速度 |
Experimental Study on Temperature Field in Injection Mould |
| |
| Luo Zhigao Chen Jiazhen Li Chonghao.Experimental Study on Temperature Field in Injection Mould[J].Journal of Jiangsu University:Natural Science Edition,1993(4). |
| |
| Authors: | Luo Zhigao Chen Jiazhen Li Chonghao |
| |
| Institution: | Luo Zhigao Chen Jiazhen Li Chonghao |
| |
| Abstract: | The authors deal with a mathematical model for temperature field in the mould under two dimensional unsteady state. The mould temperature field is experimentally measured and studied. Under the two conditions of varied co oling water hole diameter and velocity, the mould cavity isotherm and temperature field profiles are plotted by means of data acquistion and processing on a microcomputer system in the injection period, thus providing the basis for the design of the cooling system for the injection mould. |
| |
| Keywords: | injection temperature field cooling system flow velocity |
| 本文献已被 CNKI 等数据库收录！ |
