| 型转化法平面连杆机构结构分解路线的自动生成 |
| |
| 引用本文： | 饶建华,褚金奎,曹惟庆,王军.型转化法平面连杆机构结构分解路线的自动生成[J].西安理工大学学报,1993(4). |
| |
| 作者姓名： | 饶建华 褚金奎 曹惟庆 王军 |
| |
| 作者单位： | 陕西机械学院机械工程系，陕西机械学院机械工程系，陕西机械学院机械工程系，陕西机械学院机械工程系 |
| |
| 摘 要： | 用求最短回路的方法,通过寻找一组机构的有序独立的基本回路,并满足此组回路中为正值的回路自由度之和最小,只需输入少量直观的杆副信息,计算机可自动确定含P副、复铰的任何平面连杆机构的优化分解路线。
|
| 关 键 词： | 平面连杆机构 结构分解 自动生成 |
Autogeneration of the Structural Decomposition Line of the Planar Linkages by Using Type Transformation Method |
| |
| Rao Jianhua Chu Jinkui Cao Weiqing.Autogeneration of the Structural Decomposition Line of the Planar Linkages by Using Type Transformation Method[J].Journal of Xi'an University of Technology,1993(4). |
| |
| Authors: | Rao Jianhua Chu Jinkui Cao Weiqing |
| |
| Institution: | Rao Jianhua Chu Jinkui Cao Weiqing |
| |
| Abstract: | A set of independent basic sequential loops in which the summation of positive degree-of- freedom in mininum each loop by using the method of searching for the shortest loops is found in this paper. The optimum path of structural decomposition about planar linkages with P pairs and multiple joints can be determined by computer, and only a less audio-visal input information is needed. |
| |
| Keywords: | planar linkages structural decomposition autogeneration |
| 本文献已被 CNKI 等数据库收录！ |
