首页 | 本学科首页   官方微博 | 高级检索  
     检索      

充填节理破坏机理及实验
引用本文:史玲,蔡美峰,赵坚.充填节理破坏机理及实验[J].北京科技大学学报,2012(3):253-259.
作者姓名:史玲  蔡美峰  赵坚
作者单位:北京科技大学土木与环境工程学院;北京科技大学金属矿山高效开采与安全教育部重点实验室;洛桑联邦理工学院
摘    要:充填节理的破坏主要有充填物破坏和充填物与节理接触面破坏两种形式,其抗剪强度与最小抗剪部分的强度相同.当充填物破坏时,单独对充填物部分进行受力分析,得到此时的节理抗剪强度公式.讨论了充填节理强度随法向压应力及充填厚度的变化规律:随着法向压应力的增加先增大后减小,但随充填厚度的变化并不十分明显.对不同厚度的砂浆充填节理进行直剪试验.结果表明:其剪切强度与破坏模式有关;在同一破坏模式下,不同充填厚度的节理其剪切强度变化不大.

关 键 词:充填节理  抗剪强度  充填物  复合模型  破坏模式

Fracture mechanism and experiment of infilled rock joints
SHI Ling,CAI Mei-feng,ZHAO Jian.Fracture mechanism and experiment of infilled rock joints[J].Journal of University of Science and Technology Beijing,2012(3):253-259.
Authors:SHI Ling  CAI Mei-feng  ZHAO Jian
Institution:1) School of Civil and Environmental Engineering,University of Science and Technology Beijing,Beijing 100083,China 2) Key Laboratory for High-efficient Mining and Safety of Metal Mines(Ministry of Education of China),University of Science and Technology Beijing,Beijing 100083,China 3) Ecole Polytechnique Fédérale de Lausanne,Lausanne CH1015,Switzerland
Abstract:The failure of infilled rock joints can be divided into interface damage and filling damage,which one dominates depends on the stress conditions of the two parts.When the filling was damaged,its plane stress state was analyzed.A theoretical shear strength formula was obtained and the effects of normal stress and filling thickness were studied.With the increase of normal stress the shear strength of infilled rock joints increases first and then decreases,but the influence of filling thickness is not obvious.Some direct shear tests of infilled rock joints were also carried out.The results show that the shear strength is related to the failure modes of the joints,and under the same mode it is independent of filling thickness.
Keywords:infilled rock joints  shear strength  fillers  composite models  failure modes
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号