首页 | 本学科首页   官方微博 | 高级检索  
     检索      

氧化沟导流墙偏心设置的探讨
引用本文:张红亚,汤利华.氧化沟导流墙偏心设置的探讨[J].安徽理工大学学报(自然科学版),2007,27(2):21-23.
作者姓名:张红亚  汤利华
作者单位:1. 合肥工业大学土木建筑工程学院,安徽,合肥,230009;安徽建筑工业学院环境工程学院,安徽,合肥,230022
2. 安徽建筑工业学院环境工程学院,安徽,合肥,230022
摘    要:氧化沟弯道处设置导流墙以改善水流流态,提高氧化沟的运行效果。目前导流墙一般采用偏心设置,偏心距由经验确定。根据导流墙下游流速分布的要求,运用水力学基本理论,导出了氧化沟导流墙偏心距的计算公式,并结合工程实际情况,对导流墙的设置进行了讨论。当氧化沟导流墙半径小于沟宽的一半时,导流墙偏心设置,导流墙偏心距一般在0.5 m左右;导流墙半径等于或大于沟宽的一半时,导流墙可以不偏心设置。

关 键 词:氧化沟  导流墙  偏心设置  偏心距
文章编号:1672-1098(2007)02-0021-03
修稿时间:2007-02-05

Probing into Eccentric Settings of Guide Wall of Oxidation Ditch
ZHANG Hong-ya,TANG Li-hua.Probing into Eccentric Settings of Guide Wall of Oxidation Ditch[J].Journal of Anhui University of Science and Technology:Natural Science,2007,27(2):21-23.
Authors:ZHANG Hong-ya  TANG Li-hua
Institution:1. School of Civil Engineering, Hefei University of Technology,Hefei Anhui 230009,China; 2. Dept. of Environmental Engineering, Anhui Institute of Architecture and Industry, Hefei Anhui 230022,China
Abstract:The guide wall of oxidation ditch can improve the distribution of flow velocity on downstream section and reduce resistance at bend.Generally,the guide wall is eccentrically set.The eccentricity of guide wall is experientially determined at present.According to the demands for the distribution of flow velocity on downstream section,the eccentricity of guide wall of oxidation ditch was theoretically educed and discussed by contrast with practical engineering.The guide wall is eccentrically set as the radius of guide wall is less than half the width of oxidation ditch.Generally,the eccentricity of guide wall of oxidation ditch is about 0.5m.While the radius of guide wall is more than or equal to half the width of oxidation ditch the guide wall can be centrically set.
Keywords:oxidation ditch  guide wall  eccentric setting  eccentricity
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号