首页 | 本学科首页   官方微博 | 高级检索  
     检索      

SiC_p/2024Al铝基复合材料表面颗粒暴露及真空钎焊分析
引用本文:冯涛,王引真,楼松年,张蒙蒙,李春鹏.SiC_p/2024Al铝基复合材料表面颗粒暴露及真空钎焊分析[J].中国石油大学学报(自然科学版),2011,35(3):135-139.
作者姓名:冯涛  王引真  楼松年  张蒙蒙  李春鹏
作者单位:1. 中国石油大学机电工程学院,山东,东营,257061
2. 上海交通大学材料科学与工程学院,上海,200030
摘    要:采用复合材料表面颗粒暴露及表面合金化工艺,利用M6和BAI88S i钎料对S iCp/2024A l铝基复合材料进行钎焊试验,并进行金相分析、拉伸试验和X射线衍射试验。结果表明:采用(NaOH+HNO3)工艺能将复合材料表面颗粒部分暴露出来;采用表面沉积Cu,使用M6钎料,能改善钎缝的结合状态;钎缝与铝基复合材料间无明显界限,结合良好,并形成了有S iC颗粒增强的复合钎缝,S iC颗粒在钎缝中无团聚现象;钎焊接头强度能达到202 MPa;在钎缝中无A l4C3脆性相生成。

关 键 词:SiCp/2024Al铝基复合材料  颗粒暴露  表面合金化  焊接

Analysis on SiCp/2024 aluminum matrix composites surface reinforcements exposing and vacuum brazing
FENG Tao,WANG Yin-zhen,LOU Song-nian,ZHANG Meng-meng,LI Chun-peng.Analysis on SiCp/2024 aluminum matrix composites surface reinforcements exposing and vacuum brazing[J].Journal of China University of Petroleum,2011,35(3):135-139.
Authors:FENG Tao  WANG Yin-zhen  LOU Song-nian  ZHANG Meng-meng  LI Chun-peng
Institution:1(1.College of Electromechanical Engineering in China University of Petroleum,Dongying 257061,China;2.School of Material Science and Engineering,Shanghai Jiaotong University,Shanghai 200030,China)
Abstract:Using the particle exposing and surface alloying technique of aluminum matrix composite,taking M6 and BAI88Si as the filler metal,the SiCp/2024Al aluminum matrix composite was brazed.The metallographic analysis,tensile test and X-ray diffraction experiment were done.The test results indicate that the surface reinforcements are partly exposed by(NaOH+HNO3) solution.The brazing joint combination state could be improved by depositing Cu element with M6 filler metal.The brazing joint and the base metal combined well with no obvious boundary.The reinforced composite solder joints with SiC particle are formed.There is no SiC particle agglomerated in the brazing joint.The tensile strength of the welded joint can reach 202 MPa.There is no Al4C3 brittleness phase formed in the brazing joint.
Keywords:SiCp/2024 aluminum matrix composites  particle exposure  surface alloying  welding
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号